Fluke Networks OptiFiber Pro Handleiding

Fluke Networks OptiFiber Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke Networks OptiFiber Pro (10 pagina's) in de categorie . Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

PN 4095544 January 2012, Rev. 5 8/2015

2013-2015 Fluke Corporation

All product names are trademarks of their respective companies.

*4095544*

OptiFiber® Pro

OTDR

Getting Started Guide

The OptiFiber® Pro Optical Time Domain Reflectometer (OTDR)

module attaches to a Versiv™ main unit to make a rugged, hand-

held tester that lets you locate, identify, and measure reflective

and loss events in multimode and singlemode fibers. Typical

maximum test ranges are 35 km maximum at 1300 nm for

multimode fiber and 130 km maximum at 1550 nm for

singlemode fiber.

Accessing the Product Manuals

This guide provides basic information to help you get started

using the tester. For more detailed information, see the latest

versions of the Versiv Users Manual and the Versiv Technical

Reference Handbook provided on the Fluke Networks website.

Safety Information

Warning

To prevent possible fire, electric shock, or personal injury:



Read all safety information before you use the

Product.



Carefully read all instructions.

Warning or Caution: Risk of damage or destruction to equip-

ment or software. See explanations in the manuals.

Warning: Risk of fire, electric shock, or personal injury.

Warning: Class 1 or Class 2 lasers. Risk of eye damage from haz-

ardous radiation.

This key turns the Product on and off.



Do not open the case. You cannot repair or replace

parts in the case.



Do not modify the Product.



Use only replacement parts that are approved by

Fluke Networks.



Do not touch voltages > 30 V AC rms, 42 V AC peak,

or 60 V DC.



Do not use the Product around explosive gas, vapor,

or in damp or wet environments.



Use this Product indoors only.



Use the Product only as specified, or the protection

supplied by the Product can be compromised.



Do not use and disable the Product if it is damaged.



Do not use the Product if it operates incorrectly.



Batteries contain hazardous chemicals that can

cause burns or explode. If exposure to chemicals

occurs, clean with water and get medical aid.



Remove the batteries if the Product is not used for

an extended period of time, or if stored in

temperatures above 50 °C. If the batteries are not

removed, battery leakage can damage the Product.



The battery door must be closed and locked before

you operate the Product.



Repair the Product before use if the battery leaks.



Recharge the batteries when the low battery

indicator shows to prevent incorrect measurements.



Do not disassemble or crush battery cells and

battery packs.



Do not put battery cells and battery packs near heat

or fire. Do not put in sunlight.



Have an approved technician repair the Product.



For Products with rechargeable batteries, use only

AC adapters approved by Fluke Networks for use

with the Product to supply power to the Product

and charge the battery.

Warning: Class 1 and Class 2

Laser Products

To prevent eye damage and personal injury:



Do not look directly into optical connectors. Some

optical equipment emits invisible radiation that can

cause permanent damage to your eyes.



Do not look into the laser. Do not point laser

directly at persons or animals or indirectly off

reflective surfaces.



When you inspect fiber endfaces, use only

magnification devices that have the correct filters.



Use the Product only as specified or hazardous laser

radiation exposure can occur.

Caution

To prevent damage to the Product or cables under test and to

prevent data loss, read all safety information given in all

documentation supplied with the Product.

Connectors, Keys, and LEDs

GPU06.EPS

Figure 1. Connectors, Keys, and LEDs



LCD display with touchscreen.



Singlemode OTDR port with interchangeable SC adapter and

protective cap. The LED in front of the port turns on when the

port emits an optical signal.



Multimode OTDR port with interchangeable SC adapter and

protective cap. The LED in front of the port turns on when the

port emits an optical signal.



Visual fault locator port and protective cap. The LED in front of

the port turns on when the port emits an optical signal.



Product specificaties

Merk:	Fluke Networks
Categorie:
Model:	OptiFiber Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke Networks OptiFiber Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Fluke Networks

Fluke Networks LinkRunner AT 1000 Handleiding

9 Oktober 2023

Fluke Networks DTX CableAnalyzer Series Handleiding

9 Oktober 2023

Fluke Networks LinkRunner AT 2000 Handleiding

9 Oktober 2023

Fluke Networks TS 100 Cable Fault Finder Handleiding

9 Oktober 2023

Fluke Networks TS23 PRO Handleiding

9 Oktober 2023

Fluke Networks OptiFiber Pro Handleiding

9 Oktober 2023

Fluke Networks DSX 5000 Handleiding

9 Oktober 2023

Fluke Networks DTX-1500 Handleiding

9 Oktober 2023

Fluke Networks LinkIQ Handleiding

9 Oktober 2023

Fluke Networks LinkWare Handleiding

9 Oktober 2023

Handleiding

Nieuwste handleidingen voor

Onbekend AXHW-20a-xxx Handleiding

17 Oktober 2023

Home Electronic he 800m wh Handleiding

17 Oktober 2023

Onbekend K3 IR thermometer Handleiding

17 Oktober 2023

Home Electronic br 660 Handleiding

17 Oktober 2023

Home Electronic Freezz 12000M Handleiding

17 Oktober 2023

Onbekend TF-600 Non Contact Thermometer Handleiding

17 Oktober 2023

Home Electronic ED8525HSA Handleiding

17 Oktober 2023

Go On EKS 1835-2 Handleiding

17 Oktober 2023

Sagab By Elma 900 - Volt test Handleiding

15 Oktober 2023

Sagab By Elma Magnet Stick Handleiding

15 Oktober 2023