Flir Summit DBV54DL Handleiding

Flir Bewakingscamera Summit DBV54DL

Lees hieronder de 📖 handleiding in het Nederlandse voor Flir Summit DBV54DL (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Product Information
User Manuals Quick Start Guides
Specification Sheets
Video Tutorials & DemosLatest News
1 x Flat-head Screwdriver
Contents
700+ TVL VARIFOCAL
OUTDOOR IR DOME CAMERA
MODEL: DBV54DL
QUICK START GUIDE
English Version 1.0
www.digimerge.com
IT’S ALL ON THE WEB!
www.digimerge.com
VISIT
Digimerge Technologies Inc.
Copyright © 2013
As our products are subject to continuous improvement, Digimerge
reserves the right to modify product design, specifications and prices,
without notice and without incurring any obligation. E&OE
1 x Weatherproof IR Dome
Camera with Varifocal Lens
1 x Hex Allen Key
Features
Safety Precautions
• Use an appropriate low voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens cover.
2 x Rubber Weatherproofing Plugs
4 x Mounting Screws
• 1/3” Sony EXview™ II 960H with Effio DSP / 700+ TVL
• Superior Low Light Sensitivity
• Advanced Digital Noise Reduction
• Smart IR Night Vision (100ft/30m)*
• 2.8–12mm Varifocal Auto Iris Lens
• External Zoom / Focus Adjustment
• IP66 Weatherproof Rating**
• 3-Axis Design for Wall/Ceiling Mounting
• Vandal Resistant
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on the
camera application.
** Not recommended for submersion in water.
Flat-head Screwdriver
Image Sensor 1/3” Sony EXview HAD™ II 960H
Video Format NTSC
Effective Pixels H: 976 V: 494
Horizontal Resolution 700+ TVL
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio > 48dB
Iris AES
AES Shutter Speed 1/60 ~ 1/100,000 sec.
Min. Illumination 0.1 LUX (IR Off)
0 LUX (IR LEDs On)
Video Output Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type 2.8–12mm / VarifocalF1.4
FOV (Diagonal) 33–104°
Termination Video: BNC Female
IR Range / Qty. 100ft / 30m; 36 IR LED’s
Power Requirement 12V DC ± 10%
Power Consumption 450mA MAX with IR LED
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Environmental Rating IP66
Dimensions Diameter: 4.8” (121mm)
Height: 3.4” (86mm)
Weight (including stand) 1.4lbs / 0.6kg
Dimensions
Camera Specifications
121mm / 4.8”
86mm / 3.4”
Camera Base
To install the camera:
1. Use the included Allen key to loosen the dome cover
from the camera base.
2. Rotate the camera base counterclockwise to separate
it from the ball camera and dome cover.
3. Feed the BNC / power cable through the camera
base.
4. Connect the video and power cable as described in
the next section ‘Setting up the Camera’.
5. Mount the camera base to the wall or ceiling using the
included screws.
6. Position the dome cover over the camera and screw it
clockwise halfway onto the camera base.
7. Move the ball camera to the desired position. While
holding the ball camera firmly in place, screw the
dome cover the rest of the way to secure it to the
camera base. Holding the camera prevents it from
moving while installing the dome cover.
8. Use the included Allen key to tighten the dome
cover.
Zoom
Focus
Installing the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
Setting up the Camera
1. Connect the BNC connector of the camera
to the video cable.
2. DC Power— : Connect a Power Adapter
12V DC Power Adapter (not included) to
the camera. Plug the Power Adapter into a
local power outlet.
• DC Power— (not included): Power Pigtail
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: For pigtail connection with 12V DC, make sure to
check polarity specifications on the power adapter.
3. Use the included flat-head screwdriver
to adjust the ZOOM and FOCUS control
screws as required.
4. Insert rubber weatherproofing plugs
(2x) firmly into the ZOOM and FOCUS
screw-holes to ensure a weatherproof
seal.
Ensure that both the
ZOOM and FOCUS
screw-holes are covered.
Weatherproofing
Plugs
WARNING - A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.

Product specificaties

Merk: Flir
Categorie: Bewakingscamera
Model: Summit DBV54DL

Heb je hulp nodig?

Als je hulp nodig hebt met Flir Summit DBV54DL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Flir

Flir

Flir M324CS Handleiding

21 Juni 2023
Flir

Flir DNR7086 Handleiding

20 Juni 2023
Flir

Flir F-304 Handleiding

16 Juni 2023
Flir

Flir MD625 Handleiding

11 Juni 2023
Flir

Flir FB-393-O Handleiding

11 Juni 2023
Flir

Flir T4390BT Handleiding

9 Juni 2023
Flir

Flir Quasar CM-6308 Handleiding

8 Juni 2023
Flir

Flir F-313 Handleiding

3 Juni 2023
Flir

Flir Quasar CM-4321 Handleiding

31 Mei 2023
Flir

Flir N233VE Handleiding

31 Mei 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Aqara

Aqara Camera Hub G2H Handleiding

28 April 2024
Iiquu

Iiquu Dummy Dome Camera Handleiding

28 April 2024
Sony

Sony SNC-VB640 Handleiding

26 April 2024
Sony

Sony SNC-EB642R Handleiding

26 April 2024
Sony

Sony SNC-VB642D Handleiding

26 April 2024
Sony

Sony SRG-HD1 Handleiding

26 April 2024
Sony

Sony SNC-ZM550 Handleiding

26 April 2024
Sony

Sony SNC-EM642R Handleiding

26 April 2024
Sony

Sony SNC-EM641 Handleiding

26 April 2024
Sony

Sony SNC-ZB550 Handleiding

26 April 2024