Flame uMCLK Handleiding
Flame
Niet gecategoriseerd
uMCLK
Bekijk gratis de handleiding van Flame uMCLK (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.5 sterren uit 11.5 reviews. Heb je een vraag over Flame uMCLK of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
MIDI / ANALOG - DIVIDER
MANUAL
Version 1.00
FLAME
Manual FLAME MCLK Version 1.00
Contents
1. Short description................................................................ 3
2. Hardware / connections.........................................................3
2.1 Connection to the modular system (Doepfer bus) 3
2.2 Modul overview 4
2.3 MIDI connections 5
3. Handling ........................................................................... 6
3.1 MODE: MIDI-Clock-Divider 6
3.2 MIDI Divider outputs 7
3.3 KEYS Trigger output / LEARN function 8
3.4 MODE: Analog-Clock-Divider / RESET function 9
3.5 Analog clock divider assignment 10
3.6 Overview of divider assignment 10-11
4. Appendix and technical informations .............................. 12
4.1 Technical details
4.2 Warrenty
4.3 Terms of production
4.4 Disposal
4.5 Support
4.6 Acknowledgment
2
1. Short description
2. Hardware / Connection
The "µMCLK Divider" module can either work as a MIDI clock divider or as an analog clock
divider. The divider outputs are assigned differently in both operating modes.
After receiving a MIDI start command, the module works as a MIDI clock divider. There are
fixed dividers on 11 outputs. Via the divider output KEYS, triggers can be triggered and mixed
via MIDI notes. The keyboard zone extends over three octaves. With the help of the LEARN
key, the receive MIDI channel and the lowest note of this 3-octave range can be defined.
When stopped (i.e. after receiving a MIDI stop command or after switching on), the module
works as an analog clock divider and divides the analog clock present at the CLOCK input. The
12 analog divider outputs can be reprogrammed via SYSEX. Ready-made SYSEX files are
already available (e.g. for even / odd dividers, Fibonacci series, offbeats, etc.). The RESET
input resets the analog counters or serves to deactivate the analog divider.
3
2.1 Connection to the euro rack modular system (Doepfer bus)
The module is delivered with a connected
ribbon cable for the Doepfer bus. The red
lead marks -12 volt. Connecting the module
please note the right polarity!
If the module is poled accidentally wrong
safety diodes avoid the immediate destruc-
tion of the module but further damages can-
not be excepted.
So please pay attention: Check the con-
nection various times before switching on!
The current consumption of the module is on
average 50mA, but can reach peaks up to a
maximum of 80mA!
CAUTION!
Do not accidentally connect the MIDI THRU
output to high CV voltages! This can possibly
damage the hardware!
-12V
Ground
Ground
Ground
+12V
Product specificaties
| Merk: | Flame |
| Categorie: | Niet gecategoriseerd |
| Model: | uMCLK |
Heb je hulp nodig?
Als je hulp nodig hebt met Flame uMCLK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Flame
5 Mei 2024
14 Augustus 2023
Handleiding Niet gecategoriseerd
- Celexon
- GE
- Kessler
- Genelec
- Rapid
- MagnaPool
- Apogee
- Unitech
- Zaahn
- Winia
- SetonixSynth
- Daikin
- BluGuitar
- Powercube
- ABC Design
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025