Fisher Paykel ADDW24PX Handleiding

Bekijk gratis de handleiding van Fisher Paykel ADDW24PX (1 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over Fisher Paykel ADDW24PX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION GUIDE | Accessory door panels

DISHWASHER DOOR PANEL INSTALLATION

433206A 08.25 US CA

SAFETY & WARNINGS

For more information, visit www.fisherpaykel.com

!

WARNING!

Electric Shock Hazard

Failure to follow this advice may result in

electrical shock or death.

•

Read and follow the safety and warnings before

operating this appliance.

COMPONENTS REQUIRED

Slider (1)4 x 13mm screws

(4)

!

WARNING!

Cut Hazard

Failure to use caution could result in injury.

• Take care: some edges may be sharp.

1. Install handle as per handle

installation guidance.

Supplied with appliance

3.9 x 38mm

screws (4)

3.5 x 11mm screws

(2)

Exit vent (1)

Supplied with door kit

Accessory panel

(1)

M3 x 31mm

screws (4)

Not supplied

9. Slot the exit vent into the

product and secure using two 3.5

x 11mm screws.

Handle (1)

4. Hang door panel.

6. Secure door panel by replacing

4 screws along the top edge of

inner door with M3 x 31mm screws.

7. Secure door panel by replacing

4 screws along the sides with 3.9 x

38mm screws.

10. Check door balance. Refer to

installation guide for details.

8. Cut the exit vent as shown.

A tall product with a standard size

door panel should be cut at line .

All other configurations can be cut

at line 7.

TALL DISHWASHER / STANDARD DOOR

STANDARD DISHWASHER /

STANDARD DOOR

TALL DISHWASHER / TALL DOOR

2

7

5. Align door panel by sliding the

accessory door until the top of the

door panel sits above the top of the

control panel.

3. Remove the four screws along the

top of the inner door.

Remove the four screws on the sides

of the inner door.

2. Secure the sliding bracket

and top as shown with 4 x

13mm screws.

Ensure ratchet is correctly

oriented, allowing the door

to be adjusted freely.

STANDARD DOOR

STANDARD DISHWASHER

STANDARD DOOR

TALL DISHWASHER

TALL DOOR

PRODUCT DIMENSIONS

Height (inch)Height (mm)

Standard door panel28 1/4717

Standard dishwasher32 1/4820

Tall door panel29 7/8759

Tall dishwasher33 3/4857

• Ensure a 1/16 (2mm) minimum ventilation

gap below the door is maintained.

• Ensure all packaging is removed and dis-

posed of responsibly.

Product specificaties