Fifine BM88 Handleiding

Bekijk gratis de handleiding van Fifine BM88 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 5.0 sterren uit 4 reviews. Heb je een vraag over Fifine BM88 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Select Adapter-The arm stand is featured with a 1/4'' screw nut,

and the product comes with a 1/4'' to 3/8 '' adapter and a 3/8 '' to

5/8 '' adapter. Select the adapter up to the size of your microphone,

shock mount, mic holder or camera. (Tips: Unscrew the two

adapters separately to disassemble for the required size adapter.)

2. Microphone/Shock Mount/Camera Installation-Keep the suitable

adapter on the arm stand joint, then put the microphone, shock

mount or camera into the joint. Tighten the locking nut to firmly

connect your mic, shock mount or camera with the arm stand.

(Following guide pictures take FIFINE product as example.)

Tips: Microphone, shock mount and camera are not included.

3. Angle Adjustment-After the above installation, you can adjust the

angle (Takes the microphone as an example).

1/4 ''1/4'' to 3/8 '' 3/8 '' to 5/8 ''

6

7

8

9

10

1. Desk Clamp Installation-Put the desk clamp onto desktop edge,

and counterclockwise screw the ratchet of desk clamp to mount

it securely to the edge of desktop.

2. Boom Arm Installation-Use allen wrench counterclockwise smaller

loosen screw on the desk clamp for space enough in the hole to

insert boom arm. Clockwise tighten the screw to firmly connect the

boom arm and desk clamp.

Use the integrated cable channels to manage mic or camera cables.

1. Slide the opposite of arrow direction to the cover.OPEN

Loosen screw to

insert boom arm

Tighten screw to

connect boom arm

12

If the desktop is in limited space (or there are obstacles), adjust the

desk clamp to a range close to the thickness of the desktop edge,

and then put it onto desktop edge. Pull down the ratchet to the left,

and then tighten it to the right.

Tips: Do not overtighten

the desk clamp.

4. Boom Arm Adjustment-Use allen wrench to counterclockwise

loosen screw, adjust the boom arm to a suitable angle, and then

clockwise tighten the screw.

3. Rotatable Ball-Head Installation-Counterclockwise loosen the

knob to fit the rotatable ball-head into boom arm, and then

clockwise screw the knob to firmly tighten them.

Tips: Do not overtighten the screw.

Step.1

Step.2

2. Put the mic or camera cables into the channels.

3. Slide the arrow direction to the cover. CLOSE

The desk clamp supports a maximum desktop thickness of 60mm

(2.4in).

Do not use the product for hanging items exceeding 1.5kg/ 3.3lbs.

Do not place hands in between boom arm segments when moving

the boom arm stand.

Be especially cautious when setting up near children.

Keep the product away from dirt and dust. If it becomes dirty,

wipe it lightly with a soft cloth moistened with a little water and

mild, neutral detergent. Volatile agents may damage the product.

13

Allen Wrench

Make sure that the mic is already put into the boom arm, and

locking nut is tightened, to prevent the mic from falling.

Hold the joint and loosen the knob to adjust suitable angle and

height of your mic, and then tighten the knob, until the microphone

in stable status.

Tips: Handle the cable management cover with care. If damaged,

the cover may not attach again.

OPEN: Slide the opposite

of arrow direction.

CLOSE: Slide the arrow

direction.

USES OF CABLE MANAGEMENT CHANNELS

11

Every Fifine product comes with a Limited Warranty that in normal

use of product will be free of any defects in material or workmanship

for a period of one year from its original date of purchase. For

detailed warranty info, please refer to the warranty policy on our

website, or contact us directly.

Eligible to bear CE Marking.

Authorized European Representative:

Name: AOCE INFORMATION TECHNOLOGY

Address: 61 rue de Lyon 75012 Paris France

Tel: +33-633297410

Authorized British Representative:

Name: AOCE LIMITED

Address: Office Suite 29a 3/F 23 Wharf Street, London, England,

SE8 3GG

Tel: +44-759 7659 775

Model Number: BM88

Product Material: Metal

Weight：1.3 kg

Maximum Length：27.8 inches (706 mm)

Weight Load: ≤1.5kg/3.3lbs

Mic Boom Arm x 1(Cable

Management Channels Insides)

Desk Clamp x 1

User's Manual x 1

Rotatable Ball-Head x 1

AS Version:23-V3

AS Version:23-V3

AS Version:23-V3

AS Version:23-V3

AS Version:23-V3

Tips:

The parts are placed in a pack.

The two adapters are already connected

on the rotatable ball-head. If necessary,

please disassemble the adapters.

1/4 ''

1/4'' to 3/8 ''

Adapter

3/8 '' to 5/8 ''

Adapter

To help you select the right boom arm for your desktop setup, we

kindly recommend that you use a Tape Measure and follow our lead

to finish a pre-purchase BM88 boom arm simulation.

COMMON INSTALLATION SCENARIOS

There are 2 common installation scenarios for BM88 boom arm.

Scenario 1: install the boom arm on the side of the table.

Scenario 2: install the boom arm at the back of the monitor.

STEP 1: MEASURE THE DESK EDGE (VERTICAL)

Use the tape measure to measure your desk edge. The BM88 supports

the thickness of desk edge between 0.8-2.4 inches (20-60 mm)

If the thickness of the table edge is less than 0.8 inches, the table

clamp installed on it cannot remain stable. If the table edge is thicker

than 2.4 inches, the table clamp cannot be installed.

Tips: Make sure that both the top and the underside of the desk clamp

are resting on flat surface. Overly rounded or overhanging desktop

deges do not make good mounting surfaces.

STEP 2: MEASURE THE DESK EDGE (HORIZONTAL)

The table edge must provide a minimum clearance of 2.1 inches

(approximately 55 mm) to properly accommodate the mounting clamp.

Or the table clamp installed on it cannot remain stable

Pull out the tape measure to 27.8 inches (706 mm), to simulating the

maximum length of the BM88 boom arm. And test whether it can fit

your microphone use. (You may stretch the tap measure a little bit

more for simulate the size of microphone.)

STEP 3: MAXIMUM LENGTH SUPPORT

Tips: If you are using a condenser microphone with a longer pickup

range, you can position yourself slightly farther away from the

microphone.

If you are using a dynamic microphone with a shorter pickup range, you

will need to position yourself closer to the microphone.

If you want to use the , the distance between Installation Scenario 2

the desktop and the lower edge of the monitor must exceed 4.2

inches (107 mm). Otherwise, the BM88 arm cannot extend beneath

the monitor.

STEP 4: MEASURE THE LOWER EDGE OF THE MONITOR

Tips: The base clamp provides horizontal rotation, but does not allow

for vertical angle adjustment.

SPECIFICATION

34211

3211

345672112

567

2

3456721

12

567

2

3456789

10

213456789

20

213456789

30

213456789

40

213456789

50

213456789

60

213456789

70

21

123456789101112131415

16

17

18

19202821222324252627

9

70

2827

345678910211

1234

9101

4

360

4.2 inches (107 mm)

27.8 inches (706 mm)

2.1 inches (55 mm)

>0.8inches

(20mm)

<2.4inches

(60mm)

CONTENT

1

2

34-

4-5

3

Common Installation Scenarios

Measure the Desk Edge (vertical)

Measure the Desk Edge (horizontal)

Maximum Length Support

Measure the Rear Edge of the Monitor

Specification

Guide of Dimension Before Purchase

6

6-9

12

13

10-11

What's in the Box

Installation of the Stand

Application of the Stand

Use of Cable Management Channels

Important Notice

USERS GUIDE’

5

Product specificaties