Fibaro The Heat Controller Handleiding

Fibaro Thermostaat The Heat Controller

Bekijk gratis de handleiding van Fibaro The Heat Controller (52 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 251 mensen en kreeg gemiddeld 5.0 sterren uit 126 reviews. Heb je een vraag over Fibaro The Heat Controller of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/52

THE HEAT

CONTROLLER

RADIATOR THERMOSTAT

Quick Manuals. Warranty Terms

ENGLISH 3

POLSKI 6

DEUTSCH 9

FRANÇAIS 12

ITALIANO 15

NEDERLANDS 18

SVENSKA 21

NORSK 24

РУССКИЙ 27

ČESKY 30

SLOVENSKÝ 33

EESTI 36

LIETUVIŲ 39

LATVIEŠU 42

MAGYAR 45

ROMÂNĂ 48

1. Connect the charger to the micro-USB port to

charge the device.

If you have the temperature sensor:

a. Use a coin to open the battery cover by

turning it counter-clockwise.

b. Remove the sticker underneath the battery.

c. Use a coin to close the battery cover by

turning it clockwise.

2. Disconnect the charger when the LED ring

pulses green (device fully charged).

3. Dismount your current thermostatic head.

4. Depending on type of your valve:

5. Mount the device on the valve and tighten it by

turning the cap clockwise.*

6. Use the included key to click the button.

7. The LED ring will start blinking blue.

If you have the temperature sensor:

a. Click the button on it now.

b. The LED ring will blink

green 5 times if the connec-

tion was successful.

8. Set the main Z-Wave controller in add mode.

9. Triple click the button on the thermostatic head.

The LED ring will start blinking white.

10. If you are adding in S2 authenticated mode,

type in the device pin code (underlined part of

the public key on the label).

11. Successful adding will be conrmed by the

controller.

* Install in horizontal position only!

ENGLISH

Use

adapter:

Danfoss RA-N

Use

adapter:

Danfoss RTD-N

Proceed

normally

M30 x 1.5

For full instruction manual and

technical specication please visit

our website:

manuals.baro.com/en/heat-controller

First launch

FIBARO Heat Controller is a remotely controlled

thermostatic head to control temperature in your

room. It measures the temperature and automati-

cally adjusts the heat level.

It can be mounted without tools on three types of

thermostatic radiator valves.

You can create schedules via app to easily manage

temperature throughout the week.

Read the manual before

attempting to install the device!

Product specificaties

Merk:	Fibaro
Categorie:	Thermostaat
Model:	The Heat Controller
Kleur van het product:	Wit
Breedte:	56 mm
Diepte:	74 mm
Hoogte:	56 mm
Ondersteunde mobiele besturingssystemen:	Android, iOS
Nauwkeurigheid:	0.5 °C
Certificering:	RoHS 2011/65/EU, RED 2014/53/EU
Smartphone ondersteuning op afstand:	Ja
Interface:	Z-Wave
Eenheid van de maatregel:	°C
Temperatuur omvang (T-T):	10 - 30 °C
Planningsfunctie:	Ja
Batterijtechnologie:	Lithium-Polymeer (LiPo)
Temperatuursensor:	Ja
Slimme thermostaat:	Ja
Handmatige temperatuurregeling:	Ja
Multi-Zone mogelijkheid:	Ja
Keteladapter inbegrepen:	Ja
Nabije-veld-activiteitssensor:	Ja