Fibaro RGB Module Handleiding

Fibaro Smarth home RGB Module

Lees hieronder de 📖 handleiding in het Nederlandse voor Fibaro RGB Module (1 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

RGBW Controller FGRGBWM-441

Product Overview:

A universal, Z-Wave compatible RGB/RGBW controller. The Fibaro RGBW Controller can control

LED strips, RGB/RGBW LEDs and 12V-24V powered light sources. In addition, the device

supports up to four 0V-10V analog sensors including temperature sensors, humidity sensors,

wind sensors, air quality sensors and light sensors. All IN and OUT terminals may be user

configured for LED control or 0V-10V signal readouts. May also be used as a dimmer with Halogen

lamps.

Product Highlights

• Current and historical power consumption measurements.

• Controlled through other Fibaro devices or any Z-Wave controller.

• Microprocessor controlled.

• Most advanced device of its type in the world.

Technical Data:

• Power source: 12V DC/24V DC.

• Rated output power: combined 12A (sum of all connected outputs).

• Max load (e.g. Halogen lamps):

at 12W-144W combined.

at 24V-288W combined.

• Conforms to UE regulations and FCC regulations

• Power consumption: Less than 0.3 W.

• Radio frequency: 868.4 MHz EU; 908.4 MHz US; 921.4 MHz ANZ; 869.2 MHz RU.

• Antenna range: up to ca. 165 ft outdoor, or up to 100 ft inside

(depends on building structure).

• External dimensions (L x W x H) 1.65in x 1.42in x 0.59in.

Product specificaties

Merk:	Fibaro
Categorie:	Smarth home
Model:	RGB Module
Kleur van het product:	Zwart
Breedte:	18 mm
Diepte:	19 mm
Hoogte:	76 mm
Stroombron:	Batterij/Accu
Connectiviteitstechnologie:	Draadloos
Ondersteund aantal accu's/batterijen:	1
Interface:	RF Draadloos
Frequentie:	908.42 MHz
Compatibele producten:	DS18B20
Draadloze technologie:	Z-Wave
Type batterij:	1/2AA