Fibaro Home Center 2 Handleiding

Fibaro Smarth home Home Center 2

Bekijk gratis de handleiding van Fibaro Home Center 2 (24 pagina’s), behorend tot de categorie Smarth home. Deze gids werd als nuttig beoordeeld door 167 mensen en kreeg gemiddeld 3.5 sterren uit 84 reviews. Heb je een vraag over Fibaro Home Center 2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/24

For more information, visit our website:

http://manuals.ﬁbaro.com/home-center-2

english......................................................................3

polski.........................................................................6

deutsch....................................................................9

français...................................................................12

español..................................................................15

português.............................................................18

русский..................................................................21

To start using FIBARO System Home Center 2, please connect the device to power and LAN sockets, as shown below.

HC2 back HC2 front

1. Unscrew left side panel

2. Take side panel off

3. Connect wires as shown

on ﬁgure below

WARNING! Do not turn Home Center 2

on without RECOVERY pendrive.

Connect power cable to the mains, and network cable

to LAN socket in your router (Home Center 2 requires an

outside router).

4. Connect Home Center 2

7. Download mobile app

POWER - power ON

LAN - HC2 connected to Ethernet

INTERNET - HC2 connected to Internet

Z-WAVE - communication within Z-Wave network

LEARN MODE [blinking slowly] - new device being

added to the Z-Wave network

LEARN MODE [blinking] - device being deleted from

the Z-Wave network

LEARN MODE [blinking quickly] - device has been

added/removed

RECOVERY - Recovery Mode active

UPDATE - New software version available for

download

SERVICE - Software update in progress

LED Indicators

Start Home Center 2 with a POWER button and wait approx.

2 minutes for the device to start. Correct connection will be

signalled by diodes 1, 2, 3 (see the glossary below).

5. Start Home Center 2

POWER

Go to www.ﬁbaro.com/support, then download and install

FIBARO Finder designated for your operating system. Run

the FIBARO Finder and click „Refresh”. List of Home Center

2 available within your local network will appear.

Select Home Center 2 by recognizing it by its serial number

(the number is on the plate on the bottom of the casing) and

click „Connect”. After successful connection login page will

appear in the browser.

Choose your language, then log in with default credentials:

Password: admin

Select Conﬁguration from the main menu. Scroll down to the

bottom and click Start upgrade. When a new software is

installed, log back in.

6. Log in to Home Center 2

Product specificaties

Merk:	Fibaro
Categorie:	Smarth home
Model:	Home Center 2
Kleur van het product:	Wit
Frequentie van processor:	1.6 GHz
Processormodel:	Intel Atom®
RAM-capaciteit:	1 GB
Connectiviteitstechnologie:	Draadloos
Ethernet LAN:	Ja
Opslagmedia:	Single-Level Cell (SLC) flash
Capaciteit opslag-drive:	2 GB
Z-Wave:	Ja
Capaciteit herstelschijf:	4 GB
Herstelmedia:	Multi-Level Cell (MLC) flits