Festo PAML-CP-90-HP3-G114 Handleiding

Bekijk gratis de handleiding van Festo PAML-CP-90-HP3-G114 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Festo PAML-CP-90-HP3-G114 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAML-CP/-MB/-MK-90

Sub-base/Mounting bracket/Module connector

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8161942

2021-10b

[8161944]

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

2Safety

2.1Safety instructions

–

Only use the product in its original condition without unauthorised modifica-

tions.

–

Only use the product if it is in perfect technical condition.

–

Take the weight of an individual device or a service unit into account.

Dependent on the design, a mounted service unit can weigh more than 50 kg.

–

Under intended use the surface temperature may reach 60 °C. Allow the device

to cool down before working on it.

–Make sure the mounting surface is sufficiently strong for the maximum forces.

–

Only use suitable mounting components.

–Mount the individual device or the service unit only on flat surfaces.

2.2Intended use

–The sub-base PAML-CP serves as an adapter for the pneumatic connection and

for pipe mounting for in-line installation of service units.

–The mounting bracket PAML-MB is used for connection and wall mounting of

individual devices or service units.

–The module connector PAML-MK is used to connect two service units of the

same size.

2.3

Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can eval-

uate the work and detect dangers. Personnel must have the relevant mechanical

training.

3Additional Information

–

Accessories

è

www.festo.com/catalogue.

4Product Range Overview

4.1

Scope of delivery

2

1

3

4

5

Fig. 1:

Sub-base PAML-CP-90-HP3-G12

1

Front plate (1x)

2

Rear plate (1x)

3

Screw (8x)

4

Washer (8x)

5

O-ring (2x)

6

7

8

Fig. 2:

Sub-base PAML-CP-90-HP3-G114

6

Front plate (1x)

7

Rear plate (1x)

8

O-ring (2x)

9

10

11

12

13

141516

Fig. 3:

Mounting bracket PAML-MB-90-HP3

9

Wall bracket (1x)

10

O-ring (1x)

11

Front plate (1x)

12

Screw (2x)

13

Rear plate (1x)

14

Sleeve (2x)

15

Screw (2x)

16

Retaining screw (1x)

17

18

19

20

Fig. 4:

Module connector PAML-MK-90-HP3

17

Screw (2x)

18

Front plate (1x)

19

O-ring (1x)

20

Rear plate (1x)

4.2Not in scope of delivery

21

22

Fig.5

21

Electrical pressure regulator (1x)

PREL-90

22

Branching module (1x)

PMBL-90

5Assembly

Some O-rings will be left over with some mounting variants.

Product specificaties