Festo KYC-63 Handleiding

Bekijk gratis de handleiding van Festo KYC-63 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over Festo KYC-63 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

KYC

Stop

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8185824

2022-12c

[8185826]

8185824

Translation of the original instructions

© 2023 all rights reserved to Festo SE & Co. KG

LOCTITE243 is a registered trademark of its respective trademark holder in certain

countries.

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

DocumentProductTable of contents

Operating instructionLinear drive DGC(I)–

Assembly instructionsShock absorber retainer DADP-

DGC

–

Tab. 1:

Applicable documents

2

Safety

2.1Safety instructions

–

Only mount the product on components that are in a condition to be safely

operated.

–

Only use the product in its original condition without unauthorised modifica-

tions.

–Observe the tightening torques. Unless otherwise specified, the tolerance is

±20%.

2.2

Intended use

The stop determines the end positions of the linear drive

slidesDGC-...-GF/-KF/-FA or DGCI:

–

Cushioned end position

–Exact end position in any position with fixed stop

Use the stop only in combination with the shock absorber retainer DADP-DGC.

3Additional information

–

Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories

è

www.festo.com/catalogue.

4

Product Range Overview

4.1Scope of delivery

1

2

3

Fig. 1:

Scope of delivery KYC-18…-40

1

Housing (1x)

2

Stop (1x)

3

Screw (1x)

1

2

3

4

Fig. 2:

Scope of delivery KYC-50/-63

1

Housing (1x)

2

Stop (1x)

3

Screw (1x)

4

Washer (1x)

4.2Not in scope of delivery

5

Fig.3

5

Linear drive (1x)

DGC-...-GF

DGC-...-KF,

DGC-...-FA,

DGCI

6

Fig.4

6

Shock absorber retainer (1x)

DADP-DGC

7

Fig.5

7

Shock absorber (1x)

YSR(W)-DGC

8

Fig.6

8

Screw locking compound (1x)

5Assembly

5.1

Assembly of KYC-18…-40

1

2

3

A

Fig.7

1.

Clamp the housing firmly. Do not damage the profile lugs[A].1

2.

Orient the stop to the housing depending on the desired alignment on21

the linear drive.5

3.

Turn the screw above the housing to the stop. Observe the tight-312

ening torque.

KYC-18-25-32-40

[Nm]8181845

5.2Assembly of KYC-50/-63

1

2

3

4

A

Fig.8

1.Clamp the housing firmly. Do not damage the profile lugs[A].1

2.Orient the stop to the housing depending on the desired alignment on21

the linear drive.5

3.

Turn the screw above the washer and the housing to the stop.3412

Tightening torque: 70Nm

5.3

Mounting stop

2

5

Fig.9

•When using customer-supplied spacer plates, take into account the projec-

tionH of the mounted stop compared to the linear drive.25

Product specificaties