Festo DADP-DGC-32-KF Handleiding
Festo
Niet gecategoriseerd
DADP-DGC-32-KF
Bekijk gratis de handleiding van Festo DADP-DGC-32-KF (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.6 sterren uit 6.5 reviews. Heb je een vraag over Festo DADP-DGC-32-KF of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
3.
DADP-DGC
Shock absorber retainer
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8174040
2022-11c
[8174042]
8174040
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1 Applicable documents
All available documents for the product
èwww.festo.com/sp.
Document Product Table of contents
Operating instruction Linear drive DGC(I) –
Assembly instructions Stop KYC –
Operating instruction Intermediate-position module
DADM-DGC-25...40
–
Tab. 1: Applicable documents
2 Safety
2.1 Safety instructions
–Only use the product in its original condition without unauthorised modifica-
tions.
–Observe the tightening torques. Unless otherwise specified, the tolerance is
±20%.
2.2 Intended use
The shock absorber retainer fastens shock absorbersYSR(W)-DGC to the slide of
linear drivesDGC-...-GF/-KF/-FA or DGCI. Use the shock absorber retainer only in
combination with a counter part for the cushioning:
–Stop KYC
–Intermediate-position module DADM-DGC
3 Additional information
–Contact the regional Festo contact if you have technical problems
èwww.festo.com.
–Accessories èwww.festo.com/catalogue.
4 Product Range Overview
4.1 Scope of delivery
1
2
3
4
Fig.1
1
Shock absorber retainer (1x)
2
Centring sleeve (2x)
3
Screw (2x),
only with DADP-DGC-…-KF
4
Screw (2x)
4.2 Not in scope of delivery
5
Fig.2
5
Linear drive (1x)
DGC-...-GF
DGC-...-KF,
DGC-...-FA,
DGCI
6
Fig.3
6
Stop (1x/2x)
KYC
7
Fig.4
7
Shock absorber (1x/2x)
YSR(W)-DGC
8
Fig.5
8
Intermediate-position module
DADM-DGC
5 Assembly
5.1 Preparation for DADP-DGC-18…-40
ZW X YV
Fig.6
• Check the slide of the linear drive .5
Steel slide:
–Multi-piece slide[V]
–Screws[W], spring pins[X] and plastic cover[Y]
Aluminium slide:
–One-piece slide[Z]
5.2 Mounting shock absorber retainer
2
A
1
3
V
Fig. 7: Mounting on steel slide
2
A
1
4
Z
Fig. 8: Mounting on aluminium slide
1. Place the centring sleeves in the seats[A].2
2. Place the shock absorber holder on the centring sleeves .1 2
Select the appropriate screws / :3 4
–shorter screws for multi-piece steel slide[V].3
–longer screws for one-piece aluminium slide[Z].4
Two screws are left over with DADP-DGC-…-KF.
4. Tighten the screws / . Observe the tightening torque.3 4
DADP-DGC -18-GF -25-GF -32-GF -18-KF -25-KF -32-KF
Screw – M5 x 303
Screw M5 x 30 M5 x 354
[Nm] 4 6
DADP-DGC -40-GF -40-KF -50 -63
Screw – M6 x 35 –3
Screw M6 x 35 M6 x 45 M8 x 454
[Nm] 8 10 25
5.3 Mounting shock absorber
If available, shock absorbers from the end cap of the linear drive can be used.5
7
B
Fig.9
• Depending on requirements screw one or two shock absorbers with stop7
sleeve and lock nut completely into the shock absorber retainer . Observe1
the tightening torque of the lock nut.
YSR(W)-DGC -18-GF -25-GF -32-GF -18-KF -25-KF -32-KF
[Nm] 3 5 8 5 20 20
YSR(W)-DGC -40-GF -40/50-B -63
[Nm] 20 35 30
5.4 Mounting stop elements
1. Mount one or two stops depending on requirements 6è1 Applicable
documents.
2. Mount intermediate-position modules depending on requirements 8è1
Applicable documents.
Product specificaties
| Merk: | Festo |
| Categorie: | Niet gecategoriseerd |
| Model: | DADP-DGC-32-KF |
Heb je hulp nodig?
Als je hulp nodig hebt met Festo DADP-DGC-32-KF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Festo
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Qoltec
- Viscount
- Cresta
- Rocket Espresso
- XS Power
- GANA
- Louroe Electronics
- Adobe
- Media-tech
- ScaleArt
- Ford
- Alesis
- Toshiba
- Ferguson
- Leef
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025