Festo CAFM-X4-H Handleiding

Bekijk gratis de handleiding van Festo CAFM-X4-H (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over Festo CAFM-X4-H of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Translation of the original instructions

© 2020 all rights reserved to Festo SE & Co. KG

1Applicable documents

All available documents for the product www.festo.com/sp.è

DocumentContents

Instruction manual for automation system CPX-

AP

Instruction manual and important information on

assembly, electrical installation and mainten-

ance tasks as well as description of the automa-

tion system CPX-AP

Tab. 1

2Safety

2.1Safety instructions

–Only mount the product on components that are in a condition to be safely

operated.

–Note the permissible vibration-shock load with this type of mounting.

è 5 Technical data

–Do not overload H-rail.

–Note the required earthing of the H-rail or module.

è 1 Applicable documents

2.2Intended use

–Mounting of modules with dimensions 30x170mm on H-rails.23

–Mounting of interfaces with dimensions 45x170mm on H-rails.23

3Product Range Overview

3.1Scope of delivery

1

H-rail mounting (1x)

CAFM-X4-H

Fig. 1

3.2Not in scope of delivery

2

Module/interface (1x)

CPX-AP-I -... with dimensions

30x170mm / 45x170mm

3

H-rail (1x)

EN 60715 TH35-...

4

Washer (2x)

(suitable for screw)5

5

Socket head screw (2x)

M4

6

Cable lug with cable (1x)

(optional)

Fig. 2

4Assembly

•Mount H-rail horizontally.3

Fig. 3 Attach H-rail mounting

•Attach the H-rail mounting to the hook[A] on the upper edge of the H-1

rail.3

Ä

Hooks[A] and springs[B] are located behind the upper edge of the H-rail.

Fig. 4 Lock H-rail mounting

1.Press the H-rail mounting against the springs[B].1

2.Swivel H-rail mounting against the H-rail.13

Ä

After releasing it, the H-rail mounting is clamped between the1

springs[B] and lugs[C].

Fig. 5 Mounting module

1.Attach module via hole[D] with a screw and washer to the H-rail254

mounting. Tightening torque: maximum 1.2Nm1

2.Attach module and if necessary the cable lug through the hole[E] with26

a screw and washer to the H-rail mounting. Tightening torque: max-541

imum 1.2Nm

5Technical data

Loadaccording to IEC 60068Type of mounting

H-rail mounting

Vibration

è 1 Applicable documents

Part 2-6SG1

Shock

è 1 Applicable documents

Part 2-27SG1

Continuous shock

è 1 Applicable documents

Part 2-27SG1

Tab. 2 Vibration and shock resistance in accordance with EN 60068

8110672

CAFM-X4-H

H-rail mounting

8110672

2020-08

[8110674]

Assembly instructions

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Product specificaties