Festo AK-8KL Handleiding

Bekijk gratis de handleiding van Festo AK-8KL (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over Festo AK-8KL of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AK-8KL

Covering

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Assembly instructions

8173428

2022-05a

[8173430]

Translation of the original instructions

© 2022 all rights reserved to Festo SE & Co. KG

1

Applicable documents

All available documents for the product

è

www.festo.com/sp.

2Safety

2.1Safety instructions

–

Only mount the product on components that are in a condition to be safely

operated.

2.2Intended use

Cover for cable entry with dust protection to a connection block or electronic

module.

The cover runs cables to a connection block or electronic module and protects

against dust.

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel are trained in

electrical engineering.

3Additional information

–

Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories

è

www.festo.com/catalogue.

4Product Range Overview

4.1Scope of delivery

2

1

3

4

Fig.1

1

Blind caps (8x)

2

Seal (1x)

3

Covering (1x)

AK-8KL

4

Screws (4x)

4.2Not in scope of delivery

5

6

7

8

Fig.2

5

Fittings kit (1x)

VG-K-M9

includes:

- pressure screw (8x)

- clamping cage (8x)

- sealing ring (8x)

6

Lock nut (1x)

M16x1.5

7

Cable connector (1x)

M16x1.5

8

Connection block, e.g. CPX-AB-8-KL

5Assembly

5.1Preparation

2

1

Fig.3

•Carefully separate the seal and the blind caps from the net.21

1

3

2

Fig.4

•

Place the seal in the groove of the covering .23

The blind caps

1 serve as dust protection. If the thread is open and the blind cap

is inserted, degree of protection IP65/67 is not achieved.

•

Press the blind caps into the unused threads of the covering .13

5.2

Sensor cable

3

Fig.5

•Cut out the trunnions on the desired threads of the covering with a suit-3

able tool, e.g. screwdriver 3 mm.<

3

8

5

Fig.6

1.

Pass the cables through the fittings .5

2.Route the cables through appropriate threaded holes on the cover .3

3.

Wire the cables to the connection block .8

Product specificaties