Fenton VS210 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton VS210 (16 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
VS-Series Active Speaker
Ref. nr.: 178.360; 178.362; 178.364; 178.366
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
OVERVIEW
1. On / O Switch
2. D On/OFF LE
Turn on or o the Woofer LED’s .
3. SD/MMC Input
Connect your SD/MMC devices to this slot to play music
with MP3-format.
4. USB Input
Connect your USB devices to this slot to play music with
MP3-format
5. Microphone Echo
Turn to adjust the Microphone Echo.
6. Microphone Treble Control
Adjust high tone control.
7. Microphone Bass Control
Adjust low tone control.
8. Microphone Input
6.3mm (1/4”) jack for connecting microphones.
9. Input Selector
Press to select the input USB / SD / BT or Line.
10. peat Re
Press key for repeating of single track or all tracks.
11. Next
Press shortly for the next song or press above 3 seconds for fast forward.
12. Play/ Pause
For switching between play and pause.
13. Previous
Press shortly Previous song or press above 3 seconds for fast backward.
14. EQ (only for MP3 module)
15. Microphone Volume
Turn to adjust the Microphone Volume.
16. Display
17. MP3 Volume
Turn to adjust the MP3 Volume.
18. Speaker output
Connection for Fenton VS passive speaker
19. LED Output
Connection for Fenton VS passive speaker to control the woofer LED.
(only available for 178.360 and 178.362)
20. Line input
RCA jack input for connecting audio units with line level output (e.g. mixer, CD player, tape recorder).


Product specificaties

Merk: Fenton
Categorie: Hifi systeem
Model: VS210
Kleur van het product: Zwart
Gewicht: 15800 g
Breedte: 350 mm
Diepte: 300 mm
Hoogte: 970 mm
Type aansluitplug: 6,3 mm
Connectiviteitstechnologie: Bedraad
Type stroombron: AC
GeĂŻntegreerde geheugenkaartlezer: Ja
Compatibele geheugenkaarten: SD
Gemiddeld vermogen: 1600 W
Volumeregeling: Draaiknop
Aantal per verpakking: 1 stuk(s)
Aanbevolen gebruik: DJ
Impedantie: 4 Ohm
Backlight: Ja
USB-aansluiting: Ja
Audio-uitgangskanalen: - kanalen
Speaker plaatsing: Vloer
Aantal drivers: 2
Woofer: Ja
Frequentiebereik: 40 - 20000 Hz
Gevoeligheid: 125 dB
AUX ingang: Ja
Luidspreker soort: 2-weg
Versterker: Ingebouwd
Diameter woofer: 254 mm
Aantal woofer drivers: 2
AC-ingangsspanning: 220-240 V
AC-ingangsfrequentie: 50 Hz
Speaker positie: Voorkant

Heb je hulp nodig?

Als je hulp nodig hebt met Fenton VS210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Fenton

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem