Fenton RP106DW Handleiding

Fenton Platenspeler RP106DW

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenton RP106DW (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

RP106 Series Record Player

Ref. nr.: 102.104; 102.105

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore, do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guidelines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the fetime. li

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- his unit have a built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged, please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your nty. Do not make any changes to the unit. This would also invalid warra

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held r sible for personal injuries caused by a disrespect of the safety recommendations espon

and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

1. Tone A Lever rm

The xed tonearm can be unlocked (raised and lowered) by using this

lever.

2. Auto-s p Switch ON/OFF to

This switch turns auto stop on or o. When the automatic stop is

enabled, the platform will start rotating as soon as the tone arm is

placed over the record and will stop rotating when it has reached the

end of the record. Some vinyl records stop fore the end do not be or

stop when the end is reached. In this case set Auto-stop to OFF.

3. Tone Arm Clip

This specially designed arm clip secures the tonearm while at rest or

when not in use.

4. 33 / 45 RPM Switch

This switch controls the RPM of the turntable platter.

5. Tone Arm

6. Cartridge (with needle)

When the turntable is not in use, it is recommendable to place the

removable protection cover on the stylus.

7. 45R PM Ad tor ap

This adaptor allows you to play 45RPM records.

8. Platter

Place your record here.

9. Spindle

10. Volume Control

Adjust the volume for the internal speakers and headphones.

11. Headphones

3.5mm headphone jack connector.

12. Power LED Indicator

13. Speakers

Bui - stereo speakers. lt in

14. Dust Cover

15. USB port

Use the included USB cable to connect your turntable to your computer. The USB connection will send audio signal from the

turntable to your computer.

16. Line Output

The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as an

amplier or a line input of a CD/DVD player .

OPERATION

1. Connect the record player with the power adapter and plug the other end into a wall power outlet.

2. Remove white protective needle cover by gently pulling towards the front of the unit.

3. Place a vinyl record on the turntable platter and select the desired speed (33/45 RPM) according to the

record.

4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto the

desired positi the record and the turntable player starts to play. on of

5. Turn the volume control knob clockwise to adjust the volume.

Note: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished If Auto Stop Control is .

turned OFF, record will NOT stop automatically when nished.

AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, it will stop when it d not yet id

reach the end (in this case, turn the AUTO STOP switch to OFF position and then it will continue playback), or it will not stop

when it has reached the end when AUTO STOP is ON.

Product specificaties

Merk:	Fenton
Categorie:	Platenspeler
Model:	RP106DW
Kleur van het product:	Hout
Gewicht:	2000 g
Breedte:	320 mm
Diepte:	280 mm
Hoogte:	110 mm
Soort:	Draaitafel met riemaandrijving
AC-adapterfrequentie:	50-60 Hz
Volumeregeling:	Knoppen
Soort voeding:	AC
AC-adapter, uitgangsspanning:	100-240 V
Nominale snelheid:	33 1/3, 45 RPM
Type cartridge:	Keramische stereo-cartridge
Line outputs (RCA):	1