Fellowes Powershred 450Cs Handleiding
Fellowes
Papiervernietiger
Powershred 450Cs
Bekijk gratis de handleiding van Fellowes Powershred 450Cs (4 pagina’s), behorend tot de categorie Papiervernietiger. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.9 sterren uit 11 reviews. Heb je een vraag over Fellowes Powershred 450Cs of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4

Quality Office Products Since 1917
Please read these instructions before use.
Do not discard: keep for future reference.
POWERSHRED® 450Ms

A. SafeSense
®
Technology
B. CD entry
C. See safety instructions
D. Paper/card entry
E. Pull-out bin
F. Window
G. Casters
H. ON/OFF switch
1. OFF
2. ON
Will shred: Paper, credit cards, CD/DVDs and staples
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper,
cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above
Paper/card shred size:
Micro-Cut .......................................................................................................2mm x 8mm
CD shred size:
Strip-Cut 8mm ....................................................................................................................
Maximum:
Sheets per pass ............................................................................................................. 7*
Cards/CDs per pass ....................................................................................................... 1*
Paper entry width .................................................................................................. 224mm
CD entry width ...................................................................................................... 124mm
* A4 (70g), paper at 220V-240V, 50/60 Hz, 1.7Amps; heavier paper, humidity or other
than rated voltage may reduce capacity. Maximum recommended daily usage rates: 300
sheets per day; 25 credit cards; 5 CDs. 7 sheets per pass to avoid jams.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
CAPABILITIES
ENGLISH
Model 450Ms
KEY
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Operation,maintenance,andservicerequirementsarecoveredintheinstruction
manual. Read the entire instruction manual before operating shredders.
• Keepawayfromchildrenandpets.Keephandsawayfrompaperentry.Alwaysset
to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–awayfromshredder
openings. If object enters top opening, switch to Reverse ( ) to back out object.
• Neveruseaerosolproducts,petroleumbasedlubricantsorotherflammable
products on or near shredder. Do not use canned air on shredder.
• Donotuseifdamagedordefective.Donotdisassembleshredder.
Do not place near or over heat source or water.
• ThisshredderhasanON/OFFSwitch(H)thatmustbeintheON(I) position to
operate shredder. In case of emergency, move switch to OFF (O) position. This
action will stop shredder immediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketofthe
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIREHAZARD–DoNOTshredgreetingcardswithsoundchipsorbatteries.
• Forindooruseonly.
• Unplugshredderbeforecleaningorservicing.
I. Control Panel and LEDs
1. Overheat (red)
2. SafeSense
®
indicator (yellow)
3. ON/OFF (blue)
4. Reverse
5. Forward
H.
G.
A.
B.
E.
F.
D.
I.
C.

ADvANCED PRODUCT FEATURES
SafeSense® Technology
Stops shredding immediately when
hands touch the paper opening.
SilentShred™ Technology
Shreds without noisy disruptions
SafeSense
®
is active and
working properly
Touch test area and
look for the SafeSense
®
indicator to illuminate
SAFESENSE® TECHNOLOGY
SET-UP AND TESTING
Stops shredding immediately when hands touch the paper opening.
2 3
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
PRODUCT MAINTENANCE
TO CLEAN THE SENSORS
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare
occasions the sensors may become blocked by paper dust causing the motor to run even if there
is no paper present.
(Note: two paper detection sensors are located in the center of the paper entry).
All micro-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding, and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER
* Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Locate Auto-start
infrared sensor
Using cotton swab, wipe
away any contamination
from the paper sensors
Dip cotton swab in
rubbing alcohol
Press and hold forward
( ) 2-3 seconds
*Apply oil across entry
34
1 2
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
1
1
Turn the shredder ON
(I) to activate SafeSense
®
Turn OFF (O) and
unplug shredder
2
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain
illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery
time for this shredder.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding.
PAPER/CARD OR CD
BASIC SHREDDING OPERATION
Plug in and
turn ON (I)
Continuous operation:
Up to 8-minutes maximum
NOTE: Shredder runs briefly after each pass to
clear entry. Continuous operation beyond 8-minutes
will trigger 15-minute cool down period.
1
Feed paper/card
straight into paper
entry and release
or
Hold CD at edge,
feed into center of
entry and release
When finished
shredding set to OFF (O)
2 3
Product specificaties
Merk: | Fellowes |
Categorie: | Papiervernietiger |
Model: | Powershred 450Cs |
Kleur van het product: | Houtskool |
Afmetingen (B x D x H): | 348 x 256 x 554 mm |
Volume mand: | 20 l |
Werkbreedte: | 220 mm |
Vernietigt CD's: | Ja |
Papier versnipperen: | Ja |
Credit cards versnipperen: | Ja |
Vernietigt tot grootte: | 2 x 8 mm |
Capaciteit documentvernietiger: | 7 vel |
Soort vernietiger: | Deeltjesversnippering |
Verwerkt nietjes: | Ja |
Beveiligingsniveau: | 5 |
Gebruiksindicatie: | 30 min |
Autostop bij vastlopen: | Nee |
Heb je hulp nodig?
Als je hulp nodig hebt met Fellowes Powershred 450Cs stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Papiervernietiger Fellowes
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
Handleiding Papiervernietiger
- Anova
- Swingline
- Dahle
- United Office
- Olympia
- Brasq
- OTTO
- Royal
- Suntec
- Rexel
- Camry
- Nedis
- Acco
- Eldom
- Zipper
Nieuwste handleidingen voor Papiervernietiger
16 Juni 2025
16 Juni 2025
15 Juni 2025
14 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025