FBT Vertus CLA 206 A Handleiding

Bekijk gratis de handleiding van FBT Vertus CLA 206 A (3 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 75 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over FBT Vertus CLA 206 A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

APPLICATIONS

TECHNICAL SPECIFICATIONSPHYSICAL SPECIFICATIONS

The FBT VERTUS CLA 206A two-way bi-amplified speaker system incorporates 2 x 6,5” custom woofer with 1,5” voice coil and 1 x

1,4" B&C HF neodymium driver with 2,5 voice coil. The internal Class D amplifier module constructed in die-cast aluminum delivers

600W for LF, 300W for HF and DSP processor with 8 equalization presets provide unexpected dynamics in a system of these

dimensions. The FBT VERTUS CLA 206A shall meet the following performance criteria: frequency response from 65Hz to 20kHz,

maximum SPL of 133dB, horizontal coverage angle of 100°, vertical coverage angle 25°. The FBT VERTUS CLA 206A feature a

0,47" birch plywood with internal metal bracing and the front shall be protected by a heavy duty metal grille. The control panel

provides Level control, HF level, Preset, HP filter, Gnd lift, 3 status led ( on, peak, prt/limit ), XLR input & link and Neutrik Powercon

Cable Duplex for power supply. New hardware for flying installations, for ground setups and the possibility of coupling two or more

FBT CLA 406.2A / CLA 206A with an angle of 0° - 20°; top side inclined 20°; It can be integrated elegantly and with minimal intrusion

into any environment. The system can be used both in small point source systems with the VERTUS CLA 118SA sub and in clusters

of two to have a dispersion of 40° vertical.

Ideal for both live applications, assisted by the CLA118SA active subwoofer, as

well as for fixed installation

2 way bi-amplified line array column

0,47" birch plywood with scratch resistant varnish

2 x 6,5" custom woofer with 1,5" voice coil

Neodymium B&C compression HF driver with 1,4" throat and 2,5" voice coil

Class D 600W RMS amplifier for LF and 300W RMS for HF

DSP processor with 8 equalization presets

100°H x 25°V dispersion

Completely Manufactured in Italy

2 way bi- biamplified

65Hz - 20kHz

100° H x 25° V

1.2 kHz

640 W

AC Power requirement

133dB

190 x 777 x 290mm

44,09 lbs / 20 kg

51,80 lbs / 23,5 kg

2 x 6,5" - 1,5" coil

7,48" x 30,59" x 11,41"

306 x 875 x 416mm

12,04" x 34,44" x 16,37"

0,47" birch plywood

Built-in Amplifiers LF / HF *max.: 600W RMS / 300W RMS

max. peak.: 1200W / 600W

Input Impedance 22kOhm

Maximum SPL ( peak ) **

16,40 ft / 5 mt.Power cord

XLR with loop

MAX.: 2mS burst, rms power on nominal speaker impedance

MAX PEAK: based on max peak output voltage and nominal speaker impedance

PEAK SPL: free space, based on max peak power amp rating and system peak sensitivity, 10mS time average

1 x 1,4" - 2,5" coil

CLA 206A

Active Column Line Array

FEATURES

PRODUCT DESCRIPTION

Product specificaties