FASTCABLiNG 5380-42 Handleiding

Bekijk gratis de handleiding van FASTCABLiNG 5380-42 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over FASTCABLiNG 5380-42 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PoE Ethernet Surge Protector EN

How Can Ethernet Surge Protector Help My PoE Camera?

If the light s the camera directly, will be burn down, but the odds of that happening are slimmer. More than 50% inghititedof

the IP cameras get defecve caused by the surge or electrostac discharge which could generate from the natural

phenomenon such as lighng en the power in your POE switch. When the cameras damage, you will see the cameraev’s power

indicator LED is sll , not ashing which means the switch cant communicate with the IP camera anymore. ThereONbut’’s no

data exchange between themThe FASTCABLING Ethernet surge protector can be added next to the camera the switch, . or

protect the surge from the power on switch or electrostatic discharge ingpicked up by Ethernet cable. The following is the

diagram. Please donhesitate to ask any quesons. We have FQA at the end of this page. ’t

FAQ

1.Do I need external power?

NO, Ethernet surge protector is passive device, plug and play.

2.Do I need to ground the protector?

It is better to ground the protector, when it has strong surge, it will release to ground instead of ring the protector.

3.Do I need to ground the camera as well?

If you have ground the protector and the camera or AP is powereded by PoE, the protector will isolate your device. You don’t

need to ground the device anymore.

4.Where should I add the protector ?

It is the best place near the PoE IP device.

Product specificaties