Extech 382203 Handleiding
Extech
Niet gecategoriseerd
382203
Bekijk gratis de handleiding van Extech 382203 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 5.0 sterren uit 20 reviews. Heb je een vraag over Extech 382203 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
User Manual
Three Output DC Regulated Power Supply
Models 382203 (Analog) and 382213 (Digital)
Addional User Manual Translaons available at www.extech.com
2 382203- -382213 en-US_V2.0 8/19
Introduction
Congratulations on selecting Extech's Model 382203 (analog) or 382213 (digital)
Regulated DC Power Supply. The 382203 and 382213 are solid state, compact, well
regulated supplies suitable for many applications including bench testing, eld service,
hobby and telecommunication equipment use.
Meter Description
1. Voltage and Current LCD displays for Main output
2. Current limit status LED
3. Power switch with status LED
4. 5V 12V xed output terminals &
5. Main Output terminals for variable supply
6. Variable voltage and current adjustment knobs
Model 382213 (Digital LCD display) is shown above.
3 382203- -382213 en-US_V2.0 8/19
Operation
1. The Power Supply must be powered using the rated line voltage (120V or 220V)
within + 5%.
2. Before turning the power supply ON, remove all connected loads and set the Voltage
Adjustment Knob to the full counterclockwise position (0V DC output).
3. To operate the power supply as a constant current supply, the current output should
be set between 10% and 100% of the rated value (3A) .
4. The Current Limiting Indicator will light when the current limiting circuit is activated.
5. Constant Current setup (Main output only)
Set the current knob to the minimum position
Set the voltage knob to the maximum position
Short the output leads
Turn on the power supply
Turn the current knob to the desired current value (0.3 3.0 amps) ~
Turn o the power supply
Open the test leads (remove the short)
Connect the load and turn on the power supply
6. Use the Current and Voltage Adjustment knobs for setting variable Current and
Voltage output signals respectively. Use Variable Output terminals for connections.
7. For 5VDC and 12VDC outputs, use the Fixed Output terminals.
8. The analog or digital displays will indicate actual current and voltage outputs for the
main output.
9. Keep the meter's cooling vents ( p and sides) clear of obstacles to prevent to
overheating.
Product specificaties
| Merk: | Extech |
| Categorie: | Niet gecategoriseerd |
| Model: | 382203 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 382203 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Extech
22 Oktober 2024
25 Juni 2024
25 Maart 2024
25 Maart 2024
25 Maart 2024
11 December 2023
6 December 2023
26 Juni 2023
31 Mei 2023
28 Mei 2023
Handleiding Niet gecategoriseerd
- Lincoln Electric
- Microsoft
- Swissonic
- IFootage
- Ergie
- E-ast
- Wahoo
- Agfa
- AURALiC
- Schneider
- Roadstar
- Hotpoint-Ariston
- CM Storm
- Roesle
- BOB Gear
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025