EXSYS EX-3517 Handleiding

EXSYS Controller EX-3517

Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-3517 (4 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Thank you for purchasing this 4-Port SATA3 PCI PCIe Card (non-RAID). It is designed

to support up to 4 SATA3 ports with 1 built-in SATA3 Port Mulplier ). It (PM

supports 4 SATA3 devices over one single PCI Express Slot and provides an ideal

soluon to add more SATA drives for your system.

Features:

✓ Supports 2-lane PCIe Gen 2 up to 10Gb/s

✓ Provides 4 Internal SATA3 Host Ports

✓ 4 Ports with 2 Double Deck Connectors

✓ Supports up to 4 SATA Devices, no RAID Support

✓ Supports Low Prole Form Factor

✓ Supports SATA3 transfer rate of 6.0Gb/s

✓ Supports Nave Command Queuing (NCQ)

✓ Supports FIS-based switching with Port Mulpliers

✓ Co-resides with Motherboard IDE and SATA devices

✓ Supports AHCI (Advanced Host Controller Interface) Mode

✓ Supports Win 2003, 2008, XP, Vista, Win 7, 8 , 10, .x

Linux and Mac OS

EX- 3517

4-Port SATA3 P e (x2) Card (non-RAID) CI

1. Introducon

2. Board Layout

Low Profile

Bracket

Up: Port 2

Down: Port 1

Up: Port 4

Down: Port 3

Gen 2 PCIe (x2)

Golden Fingers

4-Port SATA3 PCIe (x2) Card

Note: Due to the limitaon of the Port Mulpliers, only Port 1

can be the System Boot Drive. Other ports won’t support Boot funcon.

1. Power down the peripherals, then the computer.

2. Remove the computer cover and save the screws.

3. Choose an unused PCI Express bus slot.

4. Unscrew and remove the slot cover. Retain the screw; you will use it when you install

the SATA3 PCIe Card.

5. Place the SATA3 PCIe Card into the slot. Carefully press the board into the slot unl it

seats rmly.

6. Secure the SATA3 PCIe Card with the slot cover screw.

7. Install the internal SATA cables from the SATA connectors to your SATA devices.

8. Carefully reinstall the computer cover. Insert and ghten the computer cover screws.

9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA devices

aached to the SATA3 PCIe Card. For example:

If the informaon displayed on your monitor is correct (the installed devices are listed

with the correct device name, etc.), congratulaons! You have successfully installed the

SATA3 PCIe Card in your computer.

3. Hardware Installaon

Asmedia 106x SATA Controller Ver 1.50 AHCI Mode

reserved. S.M.A.R.T. Supported

Using PCIE Gen2 p2-x2

Firmware version 150910_00_00_00

Port PMP Model

0 0 KINGSTON SHFS37A120G SATA3

4 0 KINGSTON SHFS37A120G SATA3

5 0 ST3000DM001-9YN166 SATA3

6 0 ST3000DM001-9YN166 SATA3

4-Port SATA3 PCIe (x2) Card

The SATA3 PCIe Card supports Advanced Host Controller Interface ( ) mode which gives AHCI

soware developers and hardware designers a standard method for detecng, conguring,

and programming SATA/AHCI adapters. It exposes SATA's advanced capabilies (such as hot

swapping nave command queuing) so it does not need extra drivers for the modern and

operang systems. The following table lists the operaon system supported:

Operang Systems

Support

Windows Server 2012

Yes

Windows Vista (x86, x64)

Yes

Windows 7 (x86, x64)

Yes

Windows 8.x (x86, x64)

Yes

Windows 10.x (x86, x64)

Yes

Mac OS

Yes

Linux Based

Yes (with Kernel 2.6.19 or later)

4 Soware Insta ons Win2000/XP/2003/Vista/Win7 . lla

Product specificaties

Merk:	EXSYS
Categorie:	Controller
Model:	EX-3517
Gewicht:	300 g
Breedte:	79 mm
Diepte:	48 mm
Gebruikershandleiding:	Ja
Certificering:	CE, FCC, ROHS
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-40 - 75 °C
Ondersteunt Mac-besturingssysteem:	Ja
Mac-compatibiliteit:	Ja
Ondersteunt Linux:	Ja
Hostinterface:	PCI Express x2
Ondersteunde opslagstationinterfaces:	SATA III
Chipset:	ASMEDIA 1062 + JMicro JMB 575S
Overdrachtssnelheid:	6 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
SSD-ondersteuning:	Ja