EXSYS EX-11214HMVS Handleiding

EXSYS USB Hub EX-11214HMVS

Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-11214HMVS (2 pagina's) in de categorie USB Hub. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.1 sterren beoordeeld

Pagina 1/2
6 5 1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 15.09.22
E 11214HMV
Kompatibilität: USB 1.1, 2.0 & 3.2
Betriebssysteme: Alle Betriebssysteme
- 1x Terminal Block 9 36V
Lieferumfang: 11214HMVS, Netzteil (5V/2A), USB 2.0 Kabel, DIN Rail Kit, EX- -
Wandmontagehalterung, Anleitung
Zertifikate:
1x USB 2.0
Upstream B Buchse -
4x USB 2.0
Downstream A Buchse -
Betriebs LED
5V DC Buchse für -
im Lieferumfang
enthaltenen Netzteil
9 36V T Block für optional - -
erhältliches Netzteil
HARDWARE INSTALLATION
DRIVER INSTALLATION
Because there are large differences between PC s, we can give you only a general installation
guide for the EX 11214HMVS. Please refer your computer s reference manual whenever in -
doubt.
1. - -Install the EX 11214HMVS on a mounting rail by using the DIN Rail Kit or on the wall using
the Wall Mounting Brackets.
2. Connect the USB 2.0 cable with the USB 2.0 Upstream B Port at the EX- -11214HMVS.
3. Now connect the power connector of the included power supply to the DC Connector or the -
optionally available power supply to the Terminal Block of the hub and insert the power plug of
the power supply into a power outlet.
4. - - Now connect the other end from the USB 2.0 cable (A Plug) to the USB A Port at your PC.
All Operating Systems
After the hardware installation the Operating System will recognize the EX 11214HMVS auto--
matically and install the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at USB Controller- the following new entry:
If you see this or a similar information the hub is installed correctly.
CONNECTORS
Der robuste und industrietaugliche EX 11214HMVS USB Hub im Metallgehäuse ist mit vier - -
USB A 2.0 Buchsen ausgestattet. Er unterstützt alle USB- -Anschlüsse von 1.1 bis 3.2. Jede USB-
Buchse an der EX-11214HMVS ist zusätzlich verschraubbar. Durch die Stromversorgung über die
DC-Buchse oder den Terminal Block können an jedem USB Port 500mA zur Verfügung gestellt -
werden. Der USB 2.0 Bus unterstützt optimal die Leistung des schnellen Genesys Chipsatz. Der
EX-11214HMVS gewährleistet so eine sichere Datenübertragung und exzellente Performance von
bis zu 480Mbit/s. Er unterstützt nur den Self Powered Modus und somit ist es zwingend erforder--
lich ein externes Netzteil anzuschließen. Zusätzlich ist der EX-11214HMVS mit einem 15KV ESD
Überspannungsschutz ausgestattet. Der EX 11214HMVS unterstützt die Norm IP30. Im Lieferum--
fang ist ein DIN-Rail Kit für die Installation auf einer Tragschiene und Wandmontagehalterungen für
eine Montage an eine Wand enthalten. Das DIN Rail Kit wird mit zwei Schrauben auf der Rückseite -
festgeschraubt. Die Wandmontagehalterungen können ohne Schrauben an den Seiten des EX-
11214HMVS befestigt werden.
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
USB 2.0 B Port:-
USB 2.0 A Port:-
5V DC Connector:-
ATTENTION!
Only for use with included power supply or another
compliant power supply!
-
+
9V to 36V T Block:-
ATTENTION!
Please pay attention to the correct polarity!
Never connect the power supply to the terminal block
while it is switched on!
+V - V
USB 2.0 A Port-
Pin Signal Pin Signal
1 VCC 3 DATA+
2 DATA 4 GND -
USB 2.0 B Port-
Pin Signal Pin Signal
1 VCC 3 DATA+
2 DATA 4 GND -
Mounting of the DIN Rail Kit with -
two screws on the rear side
Mounting the Wall Mounting Bracket
on the sides
2 3
4
USB 2.0 B Buchse:-
HARDWARE INSTALLATION
TREIBER INSTALLATION
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen
PCs gibt, können wir Ihnen nur eine generelle Anleitung zum Anschluss des EX 11214HMVS -
geben. Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersys-
tems.
1. - -Installieren Sie den EX 11214HMVS mit dem DIN Rail Kit auf eine Tragschiene oder mit
den Wandmontagehalterungen an die Wand.
2. Verbinden Sie das mitgelieferte USB 2.0 Kabel mit dem USB 2.0 Upstream B Anschluss -
des Hubs.
3. Schließen Sie jetzt den Stromanschluss des im Lieferumfang enthaltenen Netzteils an die DC-
Buchse oder des optional erhältlichen Netzteils an den Terminal Block des Hubs an und
stecken Sie den Netzsteckers des Netzteils in eine Steckdose.
4. Verbinden Sie nun das andere Ende (A-Anschluss) des mitgelieferten USB 2.0 Kabels mit der
USB A Buchse an Ihrem PC.-
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX 11214HMVS -
automatisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den . Jetzt müssten Sie unter folgende >Geräte Manager<- USB Controller-
Einträge sehen:
Ist dieser oder ein ähnlicher Eintrag vorhanden, ist der USB Hub richtig installiert.
USB 2.0 A Buchse:-
ANSCHLÜSSE
5V DC Buchse:-
ACHTUNG!
Nur zur Verwendung mit im Lieferumfang enthaltenen
Netzteil oder einem anderem konformen Netzteil!
Montage des DIN Rail Kit mit -
zwei Schrauben an der Rückseite
Montage der Wandmontagehalterung
an den Seiten
DESCRIPTION & TECNICAL INFORMATION
LAYOUT
Manua
Vers. 1.0 / 15.09.22
E 11214HMV
Compatibility: USB 1.1, 2.0 & 3.2
Operating System: All Operating Systems
Connectors: 4x USB 2.0 A Port, 1x USB 2.0 B Port, 1x DC Connector 5V, - - -
- 1x Terminal Block 9 36V
Extent of Delivery: 11214HMVS, Power Supply (5V/2A), USB 2.0 Cable, EX-
- DIN Rail Kit, Wall Mounting Brackets, Manual
Certificates:
-
+
9V bis 36V T Block:-
ACHTUNG!
Bitte auf die richtige Polarität achten!
Netzteil nie eingeschaltet mit dem Terminal Block
verbinden!
+V - V
Schweiz:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Deutschland:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
The rugged and industrial grade EX 11214HMVS USB hub in metal housing is equipped with -
four USB A 2.0 ports. It supports all USB ports from 1.1 to 3.2 and can provide 500mA to each -
USB port by powering via DC Connector or Terminal Block. Each USB port on the EX- -
11214HMVS is additionally screwable. The USB 2.0 bus optimally supports the performance of
the fast Genesys chipset. The EX 11214HMVS thus ensures secure data transfer and excellent -
performance of up to 480Mbps. The EX 11214HMVS supports only Self Powered mode and - -
thus it is mandatory to connect an external power supply In addition, the EX 11214HMVS is . -
equipped with a 15KV ESD surge protection. The EX 11214HMVS supports IP30 standard and -
comes with a DIN Rail kit for installation on a DIN Rail and Wall Mounting Brackets for a mount-- -
ing on a wall. The DIN Rail Kit is screwed tight with two screws on the back. The Wall Mounting -
Brackets can be attached to the sides of the EX 11214HMVS without screws.-
USB 2.0 A Buchse-
Pin Signal Pin Signal
1 VCC 3 DATA+
2 DATA 4 GND -
USB 2.0 B Buchse-
Pin Signal Pin Signal
1 VCC 3 DATA+
2 DATA 4 GND -
1x USB 2.0
Upstream B Port -
4x USB 2.0
Downstream A Port -
Power LED
5V DC Connector for -
Power Supply which is
included in the delivery
9 36V T Block for optional - -
Power Supply


Product specificaties

Merk: EXSYS
Categorie: USB Hub
Model: EX-11214HMVS

Heb je hulp nodig?

Als je hulp nodig hebt met EXSYS EX-11214HMVS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden