Exibel AN2741 Handleiding

Bekijk gratis de handleiding van Exibel AN2741 (5 pagina’s), behorend tot de categorie Tv-antenne. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over Exibel AN2741 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

English

GREAT BRITAIN •customer service

tel:08545 300 9799 customerservice@clasohlson.co.uk www.clasohlson.com/uke-mail: internet:

Ver. 20130430

Indoor Aerial

Art.no 38-4871 Model AN2741

Please read theentire instruction manual before using theproduct

and save it for future reference. We reserve theright for any

errors in text or images and any necessary changes made to

technical data. If you have any questions regarding technical

problems please contact our Customer Services.

Product description

• Built-in amplifier for VHF channels 5-12 and UHF channels

21–60.

• Good reception capabilities under favourable

reception conditions.

• Can be operated from a5 V digital receiver, included

adaptor or apower inserter (sold separately.)

• Comes with a1.8 m aerial lead.

Safety

Warning: This aerial is for indoor use only.

2. Slide theaerial into thebracket.Disposal

This product should be disposed of in accordance with

local regulations. If you are unsure how to proceed,

contact your local authority.

Technical data and functions

Reception of digital terrestrial TV signal (DVB-T) and DAB signal

Interference filter for LTE signals

Extremely low noise factor

Power supplied by DVB-T receiver (or included AC/DC adaptor)

Reception rangeVHF: 174–240 MHz

UHF: 470–790 MHz

Amplifier gainVHF: 18 dB (channel 5–12)

UHF: 15 dB (channel 21–60)

Included accessories

Coaxial cableF (male) to IEC (male), 180 cm

AC/DC adaptor100–240 V AC, 50 Hz / 6 V DC, 100 mA

Installation

1. Screw thecoaxial cable to

the aerial. Usually, set-top Note:

boxes/decoders supply indoor

aerials with power via thecoaxial

cable. Check whether your

decoder can supply theaerial

with power and, if such is

the case, how it is activated via

theon-screen menu.

If thedecoder cannot supply

the aerial with power, you should

use theincluded AC/DC mains

adaptor – plug theadaptor’s DC

connector into thesocket above

thecoaxial connection on

the back of theaerial.

3. Connect thecoaxial cable to theANT. IN socket on

your TV/set-top box/decoder.

SET-TOP BOX

Product specificaties