Excalibur EX-21 Handleiding

Excalibur Niet gecategoriseerd EX-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Excalibur EX-21 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26

SETUP & OPERATION MANUAL

SCROLL SAW

MODELS

#EX-16

#EX-21

#EX-30

(MODEL #EX-21 SHOWN)

FEATURES

New! Upper and lower blade guard

assembly helps prevent unintentional or

accidental hand/finger contact with the

saw blade

New! Switch protection device to prevent

accidental or unintentional start-up of the

saw.

New! Dust collector table kit for direct

dust-extraction hook-up.

Head tilts 30° (EX-16) / 38° (EX-21 & EX30)

left and 45° right, tilting the blade, not the

table keeping the workpiece level for bet-

ter control & more accurate cuts.

2" cutting thickness capacity.

Quick blade changes with finger

operated blade clamps, no tools

required.

Easy access speed and tension controls.

Onboard dust blower.

EX-16

16" throat capacity. Large 12” x 18 1/2”

(305 x 470 mm) table surface.

EX-21

21" throat capacity. Large 13 1/2” x 23 1/2”

(345 x 597 mm) table surface. Organized

blade storage on base.

EX-30

30" throat capacity. Large 14” x 32 1/2”

(358 x 825 mm) table surface. Organized

blade storage on base.

SPECIFICATIONS

LENGTH

27” (686 mm) - EX-16

32” (812 mm) - EX-21

43 1/4" (1100 mm) - EX-30

WIDTH

15” (380 mm) - EX-16 & EX-21

15 1/2” (394 mm) - EX-30

HEIGHT

17” (432 mm) - EX-16

15” (380 mm) - EX-21

15 1/4” (387 mm) - EX-30

BLADE TILT RANGE

30° (LEFT) TO 45° (RIGHT) - EX-16

38° (LEFT) TO 45° (RIGHT) - EX-21 & EX-30

THROAT

16”(406 mm) - EX-16

21”(535 mm) - EX-21

30”(762 mm) - EX-30

MAXIMUM CUTTING DEPTH

2” (51 mm)

SPEED (VARIABLE)

400 TO 1400 STROKES/MIN - EX-16

400 TO 1550 STROKES/MIN - EX-21 & EX-30

TABLE SURFACE

12” x 18 1/2” (305 x 470 mm) - EX-16

13 1/2” x 23 1/2” (345 x 597 mm) - EX-21

14” x 32 1/2” (358 x 825 mm) - EX-30

MOTOR

120 V, 1.3 A

WEIGHT

54 LBS (24.5 kg) - EX-16

65 LBS (29.5 kg) - EX-21

97 LBS (44 kg) - EX-30

VERSION 8_ REVISION 2 - MAY 05/13

(S/N: EX-16: 22018213 / EX-21: 22053213 / EX-30: 32231913)

THANK YOU for choosing this Excalibur by General®International Scroll Saw

model. This scroll saw has been carefully tested and inspected before shipment and if proper-

ly used and maintained, will provide you with years of reliable service. For your safety, as well

as to ensure optimum performance and trouble-free operation, and to get the most from your

investment, please take the time to read this manual before assembling, installing and opera-

ting the unit

The manual’s purpose is to familiarize you with the safe operation, basic function, and features

of this scroll saw as well as the set-up, maintenance and identification of its parts and compo-

nents. This manual is not intended as a substitute for formal woodworking instruction, nor to

offer the user instruction in the craft of woodworking. If you are not sure about the safety of per-

forming a certain operation or procedure, do not proceed until you can confirm, from know-

ledgeable and qualified sources, that it is safe to do so.

Once you’ve read through these instructions, keep this manual handy for future reference.

Disclaimer: The information and specifications in this

manual pertain to the unit as it was supplied from the

factory at the time of printing. Because we are commit-

ted to making constant improvements, General®Inter-

national reserves the right to make changes to compo-

nents, parts or features of this unit as deemed necessary,

without prior notice and without obligation to install any

such changes on previously delivered units. Reasonable

care is taken at the factory to ensure that the specifica-

tions and information in this manual corresponds with

that of the unit with which it was supplied. However, spe-

cial orders and “after factory” modifications may render

some or all information in this manual inapplicable to

your machine. Further, as several generations of this

model of sroll saw and several versions of this manual

may be in circulation, if you own an earlier or later ver-

sion of this unit, this manual may not depict your unit

exactly. If you have any doubts or questions contact

your retailer or our support line with the model and seri-

al number of your unit for clarification.

GENERAL® INTERNATIONAL

8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3

Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca

GENERAL®INTERNATIONAL WARRANTY

All component parts of General® International and Excalibur by General International® pro-

ducts are carefully inspected during all stages of production and each unit is thoroughly

inspected upon completion of assembly.

Limited Lifetime Warranty

Because of our commitment to quality and customer satisfaction, General® International

agrees to repair or replace any part or component which upon examination, proves to be

defective in either workmanship or material to the original purchaser for the life of the tool.

However, the Limited Lifetime Warranty does not cover any product used for professional or

commercial production purposes nor for industrial or educational applications. Such cases

are covered by our Standard 2-year Limited Warranty only. The Limited Lifetime Warranty is also

subject to the “Conditions and Exceptions” as listed below.

Standard 2-Year Limited Warranty

All products not covered by our lifetime warranty including products used in commercial,

industrial and educational applications are warranted for a period of 2 years (24 months) from

the date of purchase. General® International agree to repair or replace any part or compo-

nent which upon examination, proves to be defective in either workmanship or material to the

original purchaser during this 2-year warranty period, subject to the “conditions and excep-

tions” as listed below.

To file a Claim

To file a claim under our Standard 2-year Limited Warranty or under our Limited Lifetime

Warranty, all defective parts, components or machinery must be returned freight or postage

prepaid to General® International, or to a nearby distributor, repair center or other loca-

tion designated by General® International. For further details call our service department at

1-888-949-1161 or your local distributor for assistance when filing your claim.

Along with the return of the product being claimed for warranty, a copy of the original proof

of purchase and a “letter of claim” must be included (a warranty claim form can also be used

and can be obtained, upon request, from General® International or an authorized distributor)

clearly stating the model and serial number of the unit (if applicable) and including an expla-

nation of the complaint or presumed defect in material or workmanship.

CONDITIONS AND EXCEPTIONS:

This coverage is extended to the original purchaser only. Prior warranty registration is not

required but documented proof of purchase i.e. a copy of original sales invoice or receipt

showing the date and location of the purchase as well as the purchase price paid, must be

provided at the time of claim.

Warranty does not include failures, breakage or defects deemed after inspection by General®

International to have been directly or indirectly caused by or resulting from; improper use, or

lack of or improper maintenance, misuse or abuse, negligence, accidents, damage in han-

dling or transport, or normal wear and tear of any generally considered consumable parts or

components.

Repairs made without the written consent of General® International will void all warranty.l

Product specificaties

Merk:	Excalibur
Categorie:	Niet gecategoriseerd
Model:	EX-21

Heb je hulp nodig?

Als je hulp nodig hebt met Excalibur EX-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Excalibur

Excalibur EX-21 Handleiding

5 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024