EWT BF120TLS Handleiding

EWT Heater BF120TLS

Lees hieronder de 📖 handleiding in het Nederlandse voor EWT BF120TLS (28 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

.ff0{font-family:sans-serif;visi

08/35314/3 Issue 3

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014,

EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC

BF120TLU-T, BF120TLT-T

& BF120TLS-T (2.0kW)

BF120TLU, BF120TLT

& BF120TLS (2.0kW)

UK DE FR ESNL PT

IT PL HU SICZ SK

Dell™ PowerEdge™ R810

Hardware Owner’s

Manual

Regulatory Model: E05S

Regulatory Type: E05S001

book.book Page 1 Thursday, February 18, 2010 2:06 PM

x = min. 600 mm

h = min. 2250 mm

BF120TLS

BF120TLS-T

BF120TLU

BF120TLU-T

100

120

1 2 3

BF120TLT

BF120TLT-T

4321

390 138 390 138

285

280

250 250 280

BF120TLU-T, BF120TLT-T & BF120TLS-T

285

BF120TLU, BF120TLT & BF120TLS

600 Min.

60 mm (Min)

Notes, Cautions, and Warnings

NOTE: A NOTE indicates impo

your computer.

CAUTION: A CAUT

instructions are not fo

WARNING: A WA

injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.

Microsoft and Windows Server are either trademarks or registered trademarks of Microsoft Corporation

in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: E05S

Regulatory Type: E05S001

February 2010 Rev. A00

book.book Page 2 Thursday, February 18,

Model(s) Specification

BF120TLS 2.0 kW Rotary switch & Thermostat

BF120TLS-T 2.0 kW Rotary switch, Thermostat and Towel Rail

BF120TLT 2.0 kW Digital Timer & Thermostat

BF120TLT-T 2.0 kW Digital Timer, Thermostat and Towel Rail

BF120TLU 2.0 kW 120 minute Runback Timer & Thermostat

BF120TLU-T 2.0 kW 120 minute Runback Timer, Thermostat and Towel Rail

Important Safety Advice

READ THESE INSTRUCTIONS BEFORE USE.

WARNING – DO NOT USE THIS HEATER IN THE IMMEDIATE

SURROUNDINGS OF A BATH, A SHOWER OR A SWIMMING POOL.

DO NOT COVER THE APPLIANCE or place material or garments on it, or

obstruct the air circulation around this appliance, for example with

curtains or furniture, as this could cause overheating and a fire risk.

DO NOT PLACE AEROSOLS OR OTHER CONTAINERS SUSCEPTIBLE TO

HEAT IN THE DIRECT AIRFLOW FROM THE UNIT.

THIS HEATER MUST NOT BE LOCATED IMMEDIATELY BELOW A FIXED

SOCKET OUTLET.

The socket-outlet must be accessible at all times to enable the mains

plug to be disconnected as quickly as possible.

WARNING – DISCONNECT THE HEATER FROM THE ELECTRICITY SUPPLY

BEFORE UNDERTAKING SERVICE OR REPAIR.

DO NOT operate the heater with the mains lead overhanging the front

grill.

The appliance is not intended for use by children or other persons

without assistance or supervision if their physical, sensory or mental

capabilities prevent them from using it safely. Children should be

supervised to ensure that they do not play with the appliance.

The heater carries the Warning symbol indicating that it must not be

covered.

The instruction leaflet belongs to the appliance and must be kept in

a safe place. If changing owners, the leaflet must be surrendered to the

new owner.

IMPORTANT – If the mains lead of this appliance is damaged, it must be

replaced by the manufacturer or its service agent or similarly qualified

person in order to avoid a hazard.

WARNING: In order to avoid a hazard due to inadvertent resetting of the

thermal cut-out, this appliance must not be supplied through an external

switching device, such as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

IMPORTANT – When using the towel rail, no more than two layers of

toweling or similar fabric should be draped over each rail.

General

The heater has been designed with a durable plastic body and is to be mounted in

the vertical position with the grill pointing towards the ground.

The heater has a loading of 2.0 kW. It is designed for permanent wall mounting

and is suitable for operation on A.C. electrical supply having the same voltage as

shown on the rating label.

Electrical Installation

Before undertaking installation work, ensure the electricity supply is disconnected

from any relevant fixed wiring.

The heater must be used on an A.C. supply only and the voltage marked on the

heater must correspond to the supply voltage. This heater is fitted with a plug.

The appliance complies with EEC regulations EN55014 concerning radio and T.V

interference.

Installation Procedure

For wall mounting, care must be taken not to damage concealed cables. For this

reason, no holes must be made above or below wall power sockets.

It is essential to observe minimum wall mounting clearances, see Fig. 1. The

appliance is splash proof and may be used in bathrooms, however not in the

immediate vicinity of baths, showers, water connections, wash basins or swimming

pools - see Fig. 7.

The appliance should be fitted vertically with the outlet grill facing towards the

floor . It should be mounted not less than 1.8 metres above the floor with

a clearance of 600mm to any shelf or projecting surface below the heater and not

less than 280mm below the ceiling or other projecting surface. It must also be not

less than 250mm from an adjacent projected surface. All screws and wall plugs

needed to fix the appliance to the wall are supplied.

Wall bracket Assembly (Models BF120TLS, BF120TLT & BF120TLU.)

1. Position the wall bracket level and at the correct height on the wall - see Fig. 1.

2. Mark the position of the holes on the wall and drill and plug for the two screws.

Fix screws to depth of wall bracket - see step 1 in Fig. 2.

3. Position the wall bracket level and mark the position of the lower hole on the wall

and drill and plug for the screw - see step 2 in Fig. 2.

4. Repeat step 3 for the second lower hole - see step 3 in Fig. 2.

5. Align the wall bracket with the lower two holes and insert the screw until the wall

bracket is securely fixed - see step 4 in Fig. 2.

6. Mount the appliance on to the wall bracket - see step 5 in Fig. 2.

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

BF120TLU, BF120TLT, BF120TLS, BF120TLU-T, BF120TLT-T & BF120TLS-T UK

Wall bracket & Towel Rail Assembly (Models BF120TLS-T,

BF120TLT-T & BF120TLU-T)

On the models BF120TLS-T, BF120TLT-T & BF120TLU-T there is an additional

3 bar towel rail supplied with these models.

The procedure for assembling the towel rail is as follows:

1. Follow steps 1 - 4 above to mark the position of the holes for the product and

wall bracket.

2. Assemble the wall bracket and the towel rail together - see step 1 in Fig. 3.

3. Align the wall bracket and towel rail with the lower two holes and insert the

3 screws until the wall bracket is securely fixed - see step 2 in Fig. 3.

4. Mount the appliance on to the wall bracket - see step 3 in Fig. 3.

Controls

Switch (BF120TLS & BF120TLS-T only)

The rotary switch on models BF120TLS & BF120TLS-T (see ‘A’ in Fig. 4) allows

the appliance to operate the following functions:

O f f

Cool Blow

Half heat

Full heat

Thermostat (all models)

The heat output is controlled by the thermostat (see ‘C’ in Fig. 4), according to

the room temperature. Firstly turn the knob fully clockwise to the maximum

setting. When the room is warm enough, reduce the setting slowly until the heater

‘clicks’ off. The heater will now cycle on and off to maintain your selected room

temperature. A neon (see ‘B’ in Fig. 4) will illuminate when either heat setting is on

and will switch off when the thermostat activates.

Run back Timer (BF120TLU &BF120TLU-T only)

On these models the heater can also be switched On using the run back timer

(see ‘A’ in Fig. 5).

Setting the heater operating time:

The heater is switched on and off by means of a mechanical timer. The operating

time is infinitely adjustable up to a maximum setting of 120 minutes.

Rotate dial to the right (in clockwise direction). The heater is switched on.

After the preset time has elapsed, the heater switches off automatically (rotary

dial is in the left most position).

The heater can be switched off at any time, i.e. also before the originally set time

has elapsed, by turning the rotary dial all the way to the left.

When the runback timer is in operation full heat output can be achieved however

the thermostat is inactive and will not regulate the room temperature. When the

run back timer is not in operation the heater will operate at half heat output only.

Digital Timer Operation

IMPORTANT: Remember to observe all safety warnings when operating the heater

on auto setting, either attended or unattended.

The timer allows you to select ‘AUTO DAILY’, ‘AUTO BLOCK’, ‘MANUAL ON’ or

’MANUAL OFF’ operation MODE by pressing the ‘‘MODE’’ button until the required

MODE appears at the bottom of the timer display.

‘AUTO DAILY’ MODE allows the heater to switch ON and OFF according to a set

daily program everyday (see ‘Setting Programs’ section below).

‘AUTO BLOCK’ MODE allows the heater to switch ON and OFF according to set

of programs for weekdays only and another set for weekends only.

‘MANUAL ON’ MODE allows power to the heater uninterrupted by the program

settings.

‘MANUAL OFF’ MODE switches off all heater operation completely.

Key Lock:

If ‘ENTER’ and ‘MODE’ are pressed within 1 second, the keys will be locked. The

user will know the keys are locked as the lock symbol ‘ ’ will be displayed on the

top left hand corner of the screen. To unlock the keypad, press ‘ENTER’ and then

‘MODE’ within 1 second.

Initial Operation

For initial use, plug the heater into a regular household power point and turn the

power on. The timer is now ready to be set up for use.

Setting Current Time

1. Press the ‘PROGRAM’ button ONCE. The clock symbol appears on the

top left hand side of the screen. The user can now set the clock.

2. The hour digit will flash. To adjust the hour use the ‘-‘ & ‘+’ buttons. Confirm

the hour digit by pressing ‘ENTER’.

3. Once ‘ENTER’ has been pressed the minutes will flash. To adjust the minutes

use the ‘-‘ & ‘+’ buttons. Confirm the minute digit by pressing ‘ENTER’.

4. Once ‘ENTER’ has been pressed the arrow will flash next to Mon. use the

‘-‘ & ‘+’ buttons to set current day and press ‘ENTER’ to confirm. (This

function is available only on the 7day timer)

5. Pressing final ‘ENTER’ returns to default display.

6. To reset incorrect time, repeat previous steps.

Once the correct time is set, a total of 12 ON/OFF time programs can be set for

operation. There are two program options.

OPTION 1; DAILY (‘DLY’ on display): This is a daily program function, Monday

to Sunday with four ON/OFF program options available.

OPTION 2; BLOCK (‘BLK’ on display): This is a block program function,

Contents 3

Contents

1 About Your System . . . . . . . . . . . . . . . . . . 11 Accessing System

Front-Panel Featur

. . . . . . . . . . 12 LCD Panel Feature

. . . . . . . . . . . . . . . . . . . 14

Home Screen

. . . . . . . . . . . . . .

Setup Menu

. . . . . . . . . .

View Menu

. . . . . . . . . . . . . . . . . . . . . 17

Hard-Drive Indicat

. . . . . . . . . . . . . . 17 Back-Panel Feature

. . . . . . . . . . 18 Guidelines for Con

. . . . . . 20 NIC Indicator Cod

. . . . . . . . . . . . . . . . . . . 20 Power Indicator Co

. . . . . . . . . . . . . . . . . 21 LCD Status Messa

. . . . . . . . . . . . . . . . . . 22 Viewing Status Messages

. . . . . . . . . . . . . 23 Removing LCD Status Messages

. . . . . . . . . . 23 System Messages

. . . . . . . . . . . . . . . . . . . . 40 Warning Messages

. . . . . . . . . . . . . . . . . . . 57 Diagnostics Messa

. . . . . . . . . . . . . . . . . 58 Alert Messages

. . . . . . . . . . . . . . . . . . . . . 58

book.book Page 3 Thursday, February 18, 2010 2:06 PM

Product specificaties

Merk:	EWT
Categorie:	Heater
Model:	BF120TLS
Ontdooifunctie:	Nee
Indicatielampje:	Ja
Instelbare thermostaat:	Ja
Afmetingen (B x D x H):	390 x 140 x 290 mm
Verwarmingsvermogen:	2000 W
Verwarming power (min):	1000 W
Zomer-ventilatie:	Ja
Anti-stof filter:	Nee