Everpure Insurice Triple 7SI Handleiding

Bekijk gratis de handleiding van Everpure Insurice Triple 7SI (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Everpure Insurice Triple 7SI of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SELECTING A LOCATION

1. Give consideration to the weight of the unit when operating (filled with water). Operating weights of the Insurice Systems

are:

• Insurice Single - 7SI - 9 lbs (4.0 kg)

• Insurice Twin - 7SI - 19 lbs (8.5 kg)

• Insurice Triple - 7SI - 27 lbs (12 kg)

• Insurice Quad - 7SI - 36 lbs (20 kg)

2. The location should allow for:

• Minimum clearance of 2

1

⁄" under the cartridge(s) so it can be lowered for removal and replacement.2

• Adequate space for “in” and “out” water line connections.

• Be near a drain for flushing and near a 110V outlet if the accessory (sold separately) Everguard™ Low Pressure Alarm is

used. See Step 5.

3. If used in conjunction with the Everpure SR-X Feeder, the SR-X should be mounted after the Insurice Series Filter and as

near the equipment as possible. If possible, keep at least 6" available to the left and the right of the Insurice System in the

event poor quality water conditions require the installation of the optional Everpure E-Series Prefilter.

OPERATING SPECIFICATIONS

• For cold water use only.

• Operating Temperature: 35 – 100°F (2 – 38°C)

• Min.-Max. Working Pressure: 10-125 psi (0.7-8.6 bar), non-shock

• Flow Rate:

SystemReplacement CartridgeFlow RateCapacity

Insurice Single –

7SI7SI3.5 gpm (13.25 Lpm)25,000 gal. (94,635 L)*

Insurice Twin –

7SI7SI7.0 gpm (26.50 Lpm)50,000 gal. (189,271 L)*

Insurice Triple – 7SI7SI10.5 gpm (39.75 Lpm)75,000 gal. (283,906 L)*

Insurice Quad - 7SI7SI14.0 gpm (53.00 Lpm)100,000 gal. (378,541 L)*

INSTALLATION INSTRUCTIONS

1. Use the predrilled mounting holes in the manifold bracket as guides. Mark and drill anchor holes. Mount securely. See

Figures 1 – 4 .

2. Shut off power to equipment.

3. Connect outlet port of the Insurice System to equipment served. Always use an NSF approved pipe dope or Teflon

®

tape at

all connections. Use a backup wrench on all fittings while connecting to avoid excessive stress on the system components.

Note: If the optional E-Series Prefilter is used, install a manual shut-off valve leading to the system for servicing.

4. Connect minimum 3/8" water line to the Insurice Single System inlet. Use a minimum 1/2" line for other systems.

Insurice Single 7SI SystemInsurice Twin – 7SI SystemInsurice Triple – 7SI SystemInsurice Quad – 7SI System

*As tested by Everpure

FILTRATION & PROCESSING SOLUTIONS

7SI INSURICE SYSTEMS INSTRUCTION & OPERATION GUIDE

EVERPURE

®

EVERPURE

®

7SI INSURICE

®

SERIES SYSTEMS

Product specificaties