Eventide Riptide Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Eventide Riptide (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
QUICK REFERENCE GUIDE
Vibe Speed
Modulation rate
Vibe Intensity
Modulation depth
Swap LED Button
O = Vibe → Drive
On = Drive → Vibe
Drive Level
Drive Tone
Left is dark, Right is bright
50% is neutral
Vibe Mix
For classic Uni-Vibe:
50% for chorus
100% for vibrato
Drive Amount
0% is cleanest
100% is dirtiest
Preset LED Ladder
Drive LED Button
Green/Red = Drive On
O = Drive O
Press to toggle Voicing
Preset Mode: Toggle
Latching/Momentary for
Active/Bypass
Drive Footswitch
On/O for Drive eect
Preset Mode: Load Preset
and Active/Bypass
Vibe Footswitch
On/O for Vibe eect
Press and hold to toggle
Perform and Preset Modes
Vibe LED Button
Green/Red = Vibe On
O = Vibe O
Press to toggle Voicing
Press and hold to save Preset
Alternate Voicings
EXP
Connect Expression Pedal,
Aux Switches or TRS MIDI
(See System Setup)
Outputs 1 & 2
In Mono, both outputs
have the same dry signal
Input
Standard TS (Mono)
or TRS (Stereo)
Power
9VDC center-negative
Mini USB
Software updates and
MIDI over USB
Mono/Stereo Switch
Left = Mono (TS plug)
Right = Stereo (TRS plug)
In Stereo: Tip is OUT1, Ring is OUT2
I/O Level Switch
Left = Guitar (instrument)
Right = Line/Eects Loop
The perfect pairing of tones to surf the slow vibey
waves or drive to pulsing depths.
Drive: a balanced distortion with superb dynamics and
touch sensitivity.
Vibe: a faithful emulation of the classic Uni-Vibe™
by Shin-ei — in stereo!
Press Swap LED Button to change the eect order.
Both Drive and Vibe have an alternate voicing that can
be toggled by pressing the LED Buttons above their
corresponding footswitch. The color of the LED Button
indicates the chosen voicing.
Green Drive is a dynamic, mid range crunch.
Red Drive is a smooth and boosted overdrive.
Green Vibe is the traditional Uni-Vibe.
Red Vibe is a deeper, phasey Vibe.
Two Eects in One
Presets 5 On Board, 127 Via MIDI
The current Preset is indicated on the Preset LED Ladder. When a Preset is modied the Preset LED blinks once.
Perform and Preset Modes
Press and hold Vibe Footswitch to toggle between
Perform and Preset Modes. Preset LEDs will blink twice.
Perform Mode: Footswitches turn Drive and Vibe
eects on and o, and the corresponding LED Buttons
toggle between 2 available voicings (Green or Red).
Preset Mode: Vibe Footswitch selects Preset 1–5, and
Drive Footswitch controls Pedal Active/Bypass.
Catch Up Knob Function
When loading a new Preset, knob positions will not
align with their current parameter values. As a result,
turning a knob will likely cause an audibly abrupt
change. With Catch Up enabled, the sound does not
change until the Knob is moved to the position of the
current value.
See “System Setup” on how to enable Catch Up.
Load Presets
In Presets Mode, to select and load a Preset:
1. Press Vibe Footswitch to select Preset 1–5.
Preset 1 (top LED) to Preset 5 (bottom LED) blinks.
2. Press Drive Footswitch to load the Preset.
LED stops blinking.
Save Preset
To save one of the ve onboard Presets:
1. Press and hold Vibe LED Button. Blinking Ladder LEDs
and LED Buttons indicate you have entered Save Mode.
2. Press Vibe LED Button to select Preset 1–5.
3. Press Drive LED Button to save Preset.
LEDs stop blinking to let you know the Preset is saved.
NOTE: Save Mode times out after a few seconds.
Pressing either Footswitch exits Save Mode.


Product specificaties

Merk: Eventide
Categorie: Niet gecategoriseerd
Model: Riptide

Heb je hulp nodig?

Als je hulp nodig hebt met Eventide Riptide stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Eventide

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd