Eurolite LED Strip 4in1 Zone RF Controller Handleiding

Eurolite Niet gecategoriseerd LED Strip 4in1 Zone RF Controller

Lees hieronder de đź“– handleiding in het Nederlandse voor Eurolite LED Strip 4in1 Zone RF Controller (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 128 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
USER MANUAL
EN
No. 50531145 Receiver
Wireless remote control for single- and multi-colored LEDs 12-24 V
LED Strip 4in1 Zone RF Controller
No. 50531140 Set (receiver and remote control)
www.eurolite.de
•
Thank you for purchasing this LED control system. The wireless
receiver is especially designed for control of single- and
multi-colored (CW+WW, RGB, RGBW) LED strips requiring an
operating voltage of 12 V and 24 V direct current. The receiver is
operated by wireless control (2.4 GHz) via the remote control. 4
control zones are available. Multiple receivers can be assigned to
the zones as desired and controlled via the same remote control,
either separately or in groups. As the receivers forward the radio
signal, a large range can be covered and all color settings run in
sync. The maximum power consumption of a channel must not
exceed 6 A and of all LEDs connected 24 A. The connection must
be made by skilled personnel only. Please read these operating
instructions carefully before using the product. They contain
important information for the correct use of your product. Please
keep them for future reference.
•
Only use the product according to the instructions given herein. Damages due to
failure to follow these operating instructions will void the warranty! We do not assume
any liability for any resulting damage.
•
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the
warranty/guarantee will be null and void.
•
Unauthorized rebuilds or modifications of the product are not permitted for reasons of
safety and render the warranty invalid.
•
This product is not a toy. Keep it out of the reach of children. Do not leave packaging
material lying around carelessly.
•
Keep this device away from rain and moisture. Indoor use only.
•
Protect the product against excessive humidity and heat. The recommended
temperature is -5 to +45°C.
•
Before taking into operation, check upon possible damages. If defective, the product
must not be taken into operation.
•
This product is maintenance-free, except for occasional cleaning. You can use a
slightly dampened cloth for cleaning. Never use alcohol or solvents.
•
Maintenance and service operations are only to be carried out by authorized dealers.
INSTALLATION
•
Overview
Setup
•
Install the receiver in a suitable spot and remove the covers from the terminals.
•
Connect the LEDs to the negative and positive OUTPUT terminals (V+ = common positive pole,
V- = see figure on next page). The load by the LEDs must not exceed 6 A per channel. The
overall load must not exceed 24 A to avoid damage to the receiver.
•
For power supply, connect a regulated power supply unit (min. 12 V, max. 24 V) to the negative
and positive INPUT terminals.
•
Use the DIP switches to select the operating mode according to the connected LEDs:
RGB RGBW DIM CCT
•
Screw on the covers with the screws provided.
•
For power supply of the remote control, insert two 1.5 V AAA batteries into the battery
compartment as indicated.
•
For operation the receiver needs to be assigned to the remote control (see chapter “Wireless
Connection” on page 4).
DIP switch to select LED type
Power connection: 12-24V DC Connectors for LEDs
INSTALLATION
•
Application example 1: Single-color LEDs
V+→V+, CH1→V‒, CH2→V‒, CH3→V‒, CH4→V‒
Application example 2: White LEDs (CW+WW) with variable color temperature
V+→V+, CH1→CW, CH2→WW, CH3→CW, CH4→WW
Application example 3: RGB LEDs
V+→V+, CH1→R, CH2→G, CH3→B, CH4→not connected
Application example 4: RGBW LEDs
V+→V+, CH1→R, CH2→G, CH3→B, CH4→W

Product specificaties

Merk: Eurolite
Categorie: Niet gecategoriseerd
Model: LED Strip 4in1 Zone RF Controller

Heb je hulp nodig?

Als je hulp nodig hebt met Eurolite LED Strip 4in1 Zone RF Controller stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Eurolite

Eurolite

Eurolite SBPO-3240B Handleiding

5 Maart 2024
Eurolite

Eurolite DXT Pixel Art-Net Node IV Handleiding

5 Januari 2024
Eurolite

Eurolite SBM-32B Handleiding

15 Augustus 2023
Eurolite

Eurolite KH-1 Handleiding

15 Augustus 2023
Eurolite

Eurolite LED SCY-5 Handleiding

8 Juli 2023
Eurolite

Eurolite TPC-51 Handleiding

7 Juli 2023
Eurolite

Eurolite SAB-62X Handleiding

6 Juli 2023
Eurolite

Eurolite TPC-20 Handleiding

30 Juni 2023
Eurolite

Eurolite LED Neon Flex 230V Slim Handleiding

22 Juni 2023
Eurolite

Eurolite TH-90 Handleiding

22 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024