EtherWAN EX41941F Handleiding

Bekijk gratis de handleiding van EtherWAN EX41941F (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over EtherWAN EX41941F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright 2022 EtherWAN Systems, Inc.Page 1

All Rights Reserved

EX41941

8/2/2022

EX41941 Hardened PoE Switch

Installation Guide

1 Unpacking

Unpack the items. Your package should

include:

One EX41941 PoE switch

Power input terminal block

Wall and DIN-Rail mounting hardware

brackets

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton

and packing material.

More information available at:

https://www.etherwan.com/us

For warranty information, visit:

https://www.etherwan.com/us/support/war

ranty-policy

2 Equipment Needed

Category 5e or better cable for RJ-45

ports

48VDC power supply with voltage

adjustable up to 56VDC and power output

to handle 120W PoE power budget.

3 Select a Location

DIN-rail installations: Attach the bracket

on the unit using the included screws and

then mount on a DIN-rail.

Wall installations: Attach the brackets on

the unit using the included screws and

then mount on a wall.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient

temperature between -40 and 75ºC (-40

and 167ºF).

Keep away from heat sources, sunlight,

warm air exhausts, hot-air vents, and

heaters.

Make sure there is adequate airflow.

4 Connect to the Ports

The EX41941 has the following ports:

4 10/100/1000 Mbps PoE ports

1 10/100/1000 Mbps RJ-45 uplink port

10/100/1000BASE-T Ports

Ports 1 to 4 are gigabit copper ports that are

compliant with IEEE 802.3af/at PoE protocol,

with up to 30W power output per port. Port 5

is a gigabit copper port that can be utilized

for data uplink.

5 Connect Power

Terminal Block

Connect the unit to a suitable power supply

using appropriate wire, 18-24 AWG, rated for

105°C or higher.

Redundant power is supported. However,

only one power input is required to operate

the unit.

1.Connect power wires to the

appropriate V1+/- or V2+/- pins on

the terminal block.

2.Connect the grounding wire to the

ground screw.

3.Plug the terminal block into the

socket.

+V1- +V2-

Product specificaties