Erica Synths Pico Mod Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Pico Mod (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
FEATURESTECHNICAL SPECS
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves – can we make ANY
superior functionality synth module 3HP wide and affordable?
Erica Pico Modulator combines Envelope Generator and VCA in
one module with straight-forward controls for live
performances.
Selectable AD or ASR modes
Selectable lin or log envelope shapes
Loop mode without Gate in
Envelope output
Gate in and output signal control LEDs
Attack time 0-4" (8" in loop mode)
Decay/Release time 0-4" (8" in loop mode)
EG amplitude 0V – 10V
VCA attenuation level (0V CV In) -80dB
VCA gain 1
Power consumption +28mA, -5mA
Module width 3HP
Module depth 35mm
MOD
PICO
PICO
MOD
Use this knob to set Attack time
Switch between Triggered (AD) or
Gated (ASR) modes! In TRIG mode the
module ignores Gate length and
triggers the envelope in AD mode on
the rising edge of incoming signal
This LED indicates incoming gate signal
This LED gives visual feedback on
envelope out signal
Tis is VCA input. Patch here audio
signal, you wish to modulate. The input
is AC coupled to avoid clipping
Patch the Gate signal here to trigger
the envelope. When no cable is patched
here, the module automatically
advances to looping mode
Switch between linear or logarithmic
envelopes
This is envelope output
Tis is VCA output
Use this knob to select Decay/Release
time
Water is lethal for most of the electric devices, unless they are made
waterproof. This Erica Synths module is NOT intended for use in a humid or
wet environment. No liquids or other conducting substances must get
into the module. Should this happen, the module should be disconnected
from mains power immediately, dried, examined and cleaned by
a qualified technician.
Do not expose the module to temperatures above +50° C or below -20° C.
If you have transported module in extreme low temperatures, leave it in
room temperature for an hour before plugging it in.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in
its original packaging. All other deliveries will be rejected
and returned to you. Make sure you keep the original packaging and
technical documentation.
This device complies to the EU guidelines and is manufactured ROHS
conforming without use of led, mercury, cadmium and chrome.
Nevertheless, this device is special waste and disposal in household
waste is not recommended.
Safety Instructions
You will find Erica Synths terms of warranty at www.ericasynths.lv.
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 12
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths
Design by Ineta Briede@Carre Branding
Copying, distribution or any commercial use in any way is prohibited and needs the written
permission by Erica Synths. Specifications are subject to change without notice.
In case of any questions, feel free to contact us through www.ericasynths.lv or via e-mail
info@ericasynths.lv
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.


Product specificaties

Merk: Erica Synths
Categorie: Niet gecategoriseerd
Model: Pico Mod

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Pico Mod stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Erica Synths

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd