Erica Synths Fusion VCF3 Handleiding

Erica Synths Keyboard Fusion VCF3

Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Fusion VCF3 (2 pagina's) in de categorie Keyboard. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

THANK YOU FOR ORDERING

ERICA FUSION VCF3!

The Erica Synths Fusion series

modules are designed combining

vacuum tubes and semiconductors

therefore they bring warm, powerful

sound and overdrive possibilities of

vacuum tubes into your modular

system. Erica Fusion series consist of

range of modules used in sound

generation and shaping circuit – two

types of VCO, Mixer, real Ringmodula-

tor using audio transformers and

germanium diode ring, two VCFs, VCA,

Analogue Delay/Flanger, Palsma Drive

and others. Also Erica Fusion Systems

are available.

The Fusion VCF3 is resonant 24dB/oct

lowpass filter of unique design that

combines vacuum tubes and vactrols,

providing distinct, soft filtering. For

more versatility, the independent

audio mixer and buffered multiple is

incorporated in the module, and, most

importantly – a CV recorder that

records motion of the potentiometer,

so you can design advanced

modulation patterns.

These are audio mixer input level

controls. The mixer has gain 2, so

you can overdrive the signal for

nice distortion effects.

These are the audio mixer inputs.

This is dedicated mixer output. If

nothing is patched here, it is

normalled to the VCF input.

This is precision buffered

multiple input. Use it to split

audio and CV signals for use in

several modules, also for

feedback loops.

These are buffered multiple

outputs.

This is manual VCF cutoff

frequency control knob; the CV is

added to the knob position.

This is the VCF resonance control.

This is CV record knob.

Rotate it to record a

desired automation. When

the automation is played back,

the knob becomes divider

and multiplier. If you rotate the

knob past 12:00 clockwise,

multiplication with 2, 3, 4, 8 is

available, when rotating it

counterclockwise, same divisions

are available.

This is CV record button. In order

to record the potentiometer

automation, push and hold the

button and rotate the potentiometer.

The brightness of the knob will

indicate the CV output. To record a

next automation, push and hold the

CV record button while the

previous automation is playing and

rotate the CV record potentiome-

ter; the previous automation will be

deleted. You can pause the

automation playback on the

momentary CV value by pushing

the CV record knob promptly once.

To clear the recorded buffer, push

the button twice.

This is the recorded CV Output.

Maximum CV range is 0 - +5V.

The CV Output is normalled to

the VCF CV IN1, so, if nothing is

patched into CV1 IN, the recorded

CV directly controls the VCF

cutoff. Obviously, you can use the

recorded CV to control other

modules in your system.

This is the gate output – the unit

will output +5V gate, when the

RECORD CV knob is turned past

12:00; the LED gives visual

feedback on the gate ON. You can

use gate out for creating rhythmic

patterns manually.

This is the first external cutoff CV

input, and it’s normalled to the CV

recorder output. So, if nothing is

patched here, the CV OUT of the

recorder controls VCF cutoff.

This is the second cutoff CV input.

This is an external cutoff CV2

attenuator. CV1 and CV2 are mixed,

so you can adjust CV levels for

best effect.

This is the VCF audio input. It is

normalled to the Mixer output, so

you can mix several audio sources

before the VCF. If you use the

mixer output for patching mixer

output to different modules, patch

the VCF audio input here.

This is the VCF output

FUSION VCF3

MIX OUT MULT IN OUT1 OUT2 OUT3 VCF IN VCF OUT

IN1 IN2 T CV1 IN CV2 IN

1 7

1312

3 4 5 5 5 15 16

2 2 11 10

FEATURES:

Full analogue design

Vacuum tube and vactrol based filter circuit. Because of vactrol lag,

the VCF will not accept audio rate modulation, the maximum

modulation frequency is 10Hz

Input signal mixer with gain 2 for signal overdrive

Buffered multiple for splitting audio and CV signals

Potentiometer motion record unit with CV and gate outputs

Recorded CV multiplication and division

TECHNICAL SPECIFICATIONS:

Filter slope 24dB/oct

Audio Input level 10Vptp

CV input level -5V - +5V

CV Output level 0V - +5V

Panel width 20HP

Module depth 36mm

Power consumption 81mA@+12V, 76mA@-12V

You will nd Erica Synths terms of warranty at www.ericasynths.lvﬁ

Items for return, exchange and/or warranty repair have to be sent to:

Erica Synths

Andrejostas Str. 43

Riga

Latvia

LV-1045

User manual by Girts Ozolins@Erica Synths.

Design by Ineta Briede@Black8.

Copying, distribution or any commercial use in any way is prohibited and needs the

written permission by Erica Synths.

Speciﬁcations are subject to change without notice.In case of any questions, feel

free to contact us through www.ericasynths.lv.

SAFETY INSTRUCTIONS

Please follow the instructions for use of the Erica Synths module below, ‘cause only this will guarantee proper operation of the module

and ensure warranty from Erica Synths.

The module has to be shipped in the original packaging

only. Any module shipped to us for return, exchange and/or warranty repair has to

be in its original packaging. All other deliveries will be rejected and returned to you.

Make sure you keep the original packaging and technical documentation.

This device complies to the EU guidelines and is manufactured RoHS conforming

without use of lead, mercury, cadmium and chrome. Nevertheless, this device is

special waste and disposal in household waste is not recommended.

Transport the instrument carefully, never let it drop or fall over. Warranty does

not apply to modules with visual damages.

Water is lethal for most of the electric devices, unless they are made waterproof.

This Erica Synths module is NOT intended for use in a humid or wet environment. No

liquids or other conducting substances must get into the module. Should this

happen, the module should be disconnected from mains power immediately, dried,

examined and cleaned by a quali ed technician. ﬁ

Do not expose the module to temperatures above +50° C or below -20° C. If you have

transported module in extreme low temperatures, leave it in room temperature for an

hour before plugging it in.

Product specificaties

Merk:	Erica Synths
Categorie:	Keyboard
Model:	Fusion VCF3

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Fusion VCF3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Keyboard Erica Synths

Erica Synths Pico Drums Handleiding

18 Maart 2024

Erica Synths Bullfrog Handleiding

7 December 2023

Erica Synths Black Output v2 Handleiding

5 Juli 2023

Erica Synths Black VCO2 Handleiding

2 Juli 2023

Erica Synths Pico Trigger Handleiding

25 Juni 2023

Erica Synths Pico Input Handleiding

23 Juni 2023

Erica Synths Black Octasource Handleiding

23 Juni 2023

Erica Synths Pico SEQ Handleiding

22 Juni 2023

Erica Synths Pico VCF1 Handleiding

20 Juni 2023

Erica Synths Fusion VCF3 Handleiding

20 Juni 2023

Handleiding Keyboard

Nieuwste handleidingen voor Keyboard

HyperX Alloy Rise 75 Top Plate Handleiding

25 April 2024

HyperX Alloy Rise Top Plate Handleiding

25 April 2024

HyperX Alloy Rise Handleiding

25 April 2024

Gamdias Hermes M6 Handleiding

16 April 2024

Gamdias Hermes M5A Handleiding

16 April 2024

Gamdias Hermes M4 Handleiding

16 April 2024

Gamdias Hermes E2 Handleiding

16 April 2024

Gamdias Hermes E3 Handleiding

16 April 2024

Gamdias Hermes P3 Handleiding

16 April 2024

Gamdias Hermes M3 Handleiding

16 April 2024