Erica Synths Black Modulator Handleiding

Bekijk gratis de handleiding van Erica Synths Black Modulator (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Erica Synths Black Modulator of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BLACK MODULATOR

CV LEVELNOISE CRUSH

CLK IN

WHITE

NOISE

PINK

NOISE

CRUSHED

NOISE

SAWTRIPULSE S&H

CV IN

x

4

÷

2

x

2

÷

4

x

1

AUDIO

LFO SYNC

THANK YOU FOR PURCHASING ERICA

SYNTHS BLACK SERIES MODULE!

Erica Black Series include high-end, unique

functionality and superior quality modules.

Only the best, highest quality components

are used, all inputs and outputs are

protected against undesired overvoltage.

When designing Black Series, we put design

and usability superior. Big knobs

are assigned to key functions of the module,

which makes Black Series ideal for live

performances. Enjoy!

Erica Synths Black Modulator is modulation

and noise source. It consists of LFO/audio

frequency oscillator with three simultaneous

waveform outputs, Zener diode-based

noise generator with three noise flavours

and clockable S&H circuit.

FEATURES:

LFO with saw, triangle and pulse outputs

LFO/Audio range switch, LFO synchronization

to the external clock

Zener diode-based noise generator for

massive, full spectrum white noise

Pink noise filter

Noise crush knob and crushed noise

output – fade from 1 bit noise to individual

random trigger bursts

Clockable sample and hold circuit.

S&H circuit based on rare, high quality S&H chip

S&H CV and clock inputs

TECHNICAL SPECIFICATIONS:

LFO frequency ............................

0,2Hz - 25Hz

Audio rate frequency ................

18Hz - 750Hz

LFO output level-5V - +5V

................................

Noise output level10Vptp ..................................

S&H CV input level ......................

up to 20Vptp

Power consumption48 mA @ +12V, ................

...................................................36 mA @ -12V

Module width ............................................

10HP

Module depth25mm

........................................

Use this knob to set

LFO and/or S&H clock

frequency.

This knob attenuates S&H

input level. S&H input is

normalled to the white

noise output, so, if nothing

is plugged in CV IN jack,

it will adjust S&H output

amplitude. To get 10Vptp

on S&H output, set the

knob full clockwise.

This is S&H circuit input.

Apply CVs or audio

signals here and turn

them into stepped CVs or

bitcrushed/ringmodulated

audio signals on the S&H

output. S&H frequency

is defined by RATE knob

setting, or incoming clock

frequency, and it can go

into audio range, as well.

These are LFO outputs.

Choose between LFO and

audio rates.

LED gives visual feedback

on LFO frequency.

Use this knob to control

crushed noise flavour –

from 1 bit noise to few

trigger bursts per second.

This is external S&H

clock input. If nothing

is patched here, it’s

normalled to the LFO.

These are noise outputs.

This is S&H output.

Apply an external clock

signal here to synchronize

the LFO frequency!

When in Sync mode,

RATE knob will work as

LFO frequency divider

by 2 and 4, when turned

counterclockwise or

multiplier, when turned

clockwise.

BLACK MODULATOR

Product specificaties