Erica Synths Black Dual VCF Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Black Dual VCF (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
CUTOF CUTOFF1 F2
IN1 LVL RESO1 CV C-OFF1 CV IN2 LVL RESO2 CV C-OFF2 CV
RESONANC RESONANCE1 E2
HP
BP
LP
HP
BP
LP
1kHz 7kHz 10kHz 16kHz
BLACK DUAL VCF
IN1 R1 CV C1 CV IN2 R2 CV C2 CV
HP1 OUT BP1 OUT LP1 OUT HP2 OUTSUM OUT BP2 OUT LP2 OUT
LINK
THANK YOU FOR CHOOSING ERICA
SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end, unique
functionality and superior quality modules.
Only the best, highest quality components
are used, all inputs and outputs are
protected against undesired overvoltage.
Erica Black series consist of range of
modules that are needed to put together
entire synth. Enjoy!
Erica Black VCF is dual multimode fi lter
with CV control over cuto and resonance
for serious modular patches. The core of
the VCF is highly stable, custom multimode
VCF chip AS3320 (produced in Riga, btw).
It can be used as two independent VCFs
with simultaneous HP, BP and LP outputs,
controls can be linked for stereo application
and both VCFs can be chained in series or
parallel to the summing output for ultimate
modulations. Bonus feature – 16 band
spectrum analyser – gives visual feedback
on what happens on summing output.
FEATURES:
Two identical multimode VCFs
Simultaneous HP, BP and LP outputs
Summing output
Serial or parallel VCF routing to the
summing output
CV control over Cutoff and Resonance
CV level attenuverters
Link switch for controlling both VCFs with
one cuto or resonance knob
16 band spectrum analyser
Skiff -friendly design
TECHNICAL SPECIFICATIONS:
Audio output amplitude .......................10Vptp
CV input (full sweep) 10Vptp ............................
Panel width ...............................................18HP
Module depth 35mm .......................................
Power consumption .........................................
................................40mA@+12V, 36mA@-12V
Adjust resonance for both
VCFs manually!
Adjust cutoff frequency
manually for both VCFs!
This is output of both
VCFs summed
This switch de nes, how
VCFs are chained to the
SUM OUT – in series
or parallel
16 band spectrum analyser
gives visual feedback on
signal that passes through
VCFs and appears on
SUM OUT
Select what fi lter mode
of VCF1 is assigned to
SUM OUT. Same goes with
the switch on the VCF2
Switch in LINK position allows to
control both VCFs with Cuto 1 and
Resonance1 knobs. Cutoff 2 and
Resonance2 knobs are disabled
These are audio and
CV inputs
These are multimode
VCF outputs – signals
from them are available
simultaneously, and mode
switch doesn’t eff ect these
Adjust audio input level
with this knob!
These are Resonance
and Cutoff attenuverters
BLACK DUAL VCF
SAFETY INSTRUCTIONS
DISPOSAL
Please follow the instructions for use of this
Erica Synths module below, ‘cause only this
will guarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices,
unless they are made waterproof. Erica
Synths module is NOT intended for use in
a humid or wet environment. No liquids or
other conducting substances must get into
the module. Should this happen, the module
should be disconnected from mains power
immediately, dried, examined and cleaned by
a qualified technician.
Do not expose the module to temperatures
above +50° C or below -20° C.
Transport the instrument with modules
installed carefully, never let it drop or fall over.
Warranty does not apply to modules with
visual damages.
The module has to be shipped in the original
packaging only. Any module shipped to us
for return, exchange and/or warranty repair
has to be in its original packaging. All other
deliveries will be rejected and returned to you.
Make sure you keep the original packaging
and technical documentation.
You will find Erica Synths terms of warranty at
http://ericasynths.lv/en/terms/
Items for return, exchange and/or warranty
repair have to be sent to: Erica Synths,
Andrejostas Str.12, Riga, Latvia, LV-1045
This device complies to the EU guidelines and is
manufactured RoHS conforming without use of
led, mercury, cadmium and chrome.
Nevertheless, this device is special waste and
disposal in household waste is not
recommended.
Designed and made in Latvia.
User manual by Girts Ozolins@Erica Synths.
Design by Baiba Stelle.
Copying, distribution or any commercial use in
any way is prohibited and needs the written
permission by Erica Synths.
Specifications are subject to change without
notice.
In case of any questions feel free to contact us
via e-mail info@ericasynths.lv
Check out other Erica Synths modules & devices
at www.ericasynths.lv
BLACK DUAL VCF


Product specificaties

Merk: Erica Synths
Categorie: Niet gecategoriseerd
Model: Black Dual VCF

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Black Dual VCF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Erica Synths

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd