Ergotron ZGCLCG Handleiding

Ergotron Niet gecategoriseerd ZGCLCG

Bekijk gratis de handleiding van Ergotron ZGCLCG (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.5 sterren uit 4.5 reviews. Heb je een vraag over Ergotron ZGCLCG of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

A S S E M B LY I N S T R U C T I O N S

Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

ZidoTM Gel Cup/Probe Holders

Rev A November 2014

NOTE: The Zido Base Unit is not included.

Product Part#

Zido Gel Cup/Probe Holder Small ZGCSSB

Zido Gel Cup/Probe Holder Large ZGCLSB

WELC O ME

Thank you for purchasing

Zido Gel Cup/Probe Holder!

If you have any questions or if we

can help you in any way, please

PARTS L IST

Before beginning assembly of your Zido accessory, please

review the parts list to verify that your shipment is complete.

A 5/32" hex driver (provided with your Zido cart) is required

for this assembly.

A 1/8" drill bit and electric drill are also required.

Product Quantity Part Number

01 Zido Gel Cup/Probe Holder Bracket 1 225-2657-00

02 3/4" MDF Wood Screws 2 325-5575-00

03 Long Gel Cup/Probe Holder 1 175-5243-00

04 Short Gel Cup/Probe Holder (not shown) 1 175-5244-00

03 04

ZidoTM Gel Cup/Probe Holders Assembly Instructions 3

S T E P 1

Install the Bracket

¡ Select the installation location. Place the mounting

bracket on the bottom of the shelf at the desired

location so that the side with four holes is against

the shelf.

¡ Using the Mounting Bracket as a template, mark the

drill points through the two larger bracket holes onto

the bottom of the shelf.

¡ Drill the screw holes using a 1/8” drill bit. Because

the shelf is 3/4” thick, only drill the hole 1/2” deep.

(Mark your drill bit with masking tape to be sure

you don’t drill too far.)

¡ Install the bracket onto the shelf using

two 3/4" MDF wood screws.

S T E P 2

Install the Holder

¡ Slide the Gel Cup/Probe Holder over the

bracket until it clicks into place.

1/8" Drill Bit

Shelf Prole

1/2"

Tape

C O N G R A T U L AT I O N S ! YO U R H O L D E R A S S E M B LY I S C O M P L E T E !

3/4" Button Hd PB Screw

325-5575-00

Product specificaties

Merk:	Ergotron
Categorie:	Niet gecategoriseerd
Model:	ZGCLCG
Kleur van het product:	Grijs
Gewicht:	500 g
Breedte:	90 mm
Diepte:	60 mm
Hoogte:	115 mm
Materiaal:	Metal, Plastic
Aantal per verpakking:	1 stuk(s)
Designer:	Cushioned plastic cup