Ergotron ZDE02CG/CG Handleiding

Ergotron Niet gecategoriseerd ZDE02CG/CG

Bekijk gratis de handleiding van Ergotron ZDE02CG/CG (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.4 sterren uit 3.5 reviews. Heb je een vraag over Ergotron ZDE02CG/CG of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

1 of 4

300-5522-00 rev. B • 06/16

Zido® 2-drawer Enclosure

Built with Anthro-DNA™

NOTE: The Zido cart is not included.

Product Part#

Zido 2-drawer Enclosure ZDE02SB/CG

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

2 of 4

300-5522-00 rev. B • 06/16

Product Quantity Part Number

01 Drawer Body 1 835-539X-00

02 Upper Drawer Body 1 835-5236-00

03 Lower Drawer Body 1 835-5397-00

04 Enclosure Brackets 2 225-2732-00

05 Self-threading Screws 8 325-5464-00

06 Nylock Nuts 8 325-5259-00

07 Lock Assembly 1 325-5074-00

TH I S I S A 2-P E R S ON

J O B !

Grab a buddy!

TOOL S

A 7/16" nutdriver or socket is use-

ful for this assembly.

PA R TS L I S T

Before beginning assembly of your drawer enclosure,

please review the parts list to verify that your shipment is

complete.

3 of 4

300-5522-00 rev. B • 06/16

Self-threading Screw

325-5464-00

1/4-20 Nylock Nuts

325-5259-00

Drawer Tabs

Lock

Nut

Cam

Screw

S T E P 1

Remove the Drawers; Install the Lock

 Pull the drawer all the way out. Locate the drawer tabs on the glides

on each side of the drawer body. Depress the drawer tabs (one goes

up and one goes down) to release the drawer from the glides. Slide the

drawer o the glides and set aside.

 Repeat for the lower drawer.

 Install the lock into the lower drawer. Insert the lock cylinder inside the

lock body, then slide that assembly through the hole at the front of the

drawer body. Attach the lock assembly to the lower drawer using the

Nut. Make sure that the key is horizontal in the lock when the assembly

is attached to the drawer. Locate the straight Cam in the kit. Slip the

camp over the end of the lock and secure all the pieces with the screw

using a Phlilips screwdriver. Make sure that the Cam is facing up when

the key is horizontal.

S T E P 2

Install the Brackets onto the Column

Select an installation point for the drawer body. When installed, the

top of the drawer body will be about 1/2" above the top of the upper

bracket.

 Install the top bracket using four 3/4" self-threading screws. Install the

lower bracket with one hole open below the upper bracket.

Carefully tip the cart on its back so that the pins on the brackets are

facing up.

S T E P 3

Install the Enclosure

 Lift the enclosure body onto the cart so that the pins on the brackets

line up with the holes on the enclosure body.

 Attach the body to the brackets using a 7/16" nutdriver or socket or the

3-way wrench and eight Nylock Nuts.

S T E P 4

Install the Drawers

 Slide the larger drawer into place. Move it in and out a few times to set the ball bearings in the glides.

 Slide the small drawer into place. Move it in and out a few times to set the bearings.

CO N G R ATU L AT I O N S ! YO U R D R AW E R E N C LO S U R E A S S E M B LY I S CO M P L E T E !

Product specificaties

Merk:	Ergotron
Categorie:	Niet gecategoriseerd
Model:	ZDE02CG/CG
Kleur van het product:	Grijs
Breedte:	420 mm
Diepte:	285 mm
Hoogte:	280 mm
Gewicht verpakking:	15900 g
Breedte verpakking:	580 mm
Diepte verpakking:	460 mm
Hoogte verpakking:	330 mm
Soort:	Lade
Met slot:	Ja
Maximale gewichtscapaciteit:	22.7 kg
Materiaal:	Metaal
Aantal compartimenten:	2