Ergotron eNook Handleiding

Ergotron Bureau eNook

Bekijk gratis de handleiding van Ergotron eNook (7 pagina’s), behorend tot de categorie Bureau. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.9 sterren uit 13.5 reviews. Heb je een vraag over Ergotron eNook of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/7

1 of 7

300-5455-00 rev. F • 06/16

Built with Anthro-DNA™

eNook® Pro

Product Part#

eNook Pro for Monitors, 36w EPM3616zz/xx

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

2 of 7

300-5455-00 rev. F • 06/16

Product Quantity Part Number

01 Back Frame 1 225-2802-23

02 Main Unit 1 835-5258-00

03 1-5/8" Screw (Not Shown) 4 325-5086-00

04 1-1/2" Screw 4 325-5358-00

05 Workstation Screw 6 325-5092-00

06 Cable Clips 6 175-5217-00

07 Toggle Bolt Anchor 4 325-5394-00

08 Keyboard & Mouse Keeper 1 225-2823-00

09 Monitor Bracket 1 225-2808-00

10 3/8" Phillips Screw 4 325-5150-00

11 Rubber Grommet 1 175-5237-00

12 Monitor Mount Assembly 1 835-5696-00

PA R T S L I S T

These instructions are for Anthro’s eNook® Pro. Before beginning assembly, please take a moment to review

the parts list below to verify that your shipment is complete.

3 of 7

300-5455-00 rev. F • 06/16

14.75"

23"

1-1/2" Screw

325-5358-00

Drill

Wall Stud Prole

1½" Tape ¼"

Screw

S T E P 1

Select the Mounting Location

¡ When choosing the right place to install your eNook, be sure to check the location of your power source so you

can power equipment used inside.

¡ Your eNook can be mounted to drywall or to wood wall studs. If you’re installing to wood wall studs, go to Step

¡ If you’re installing into drywall, go to Step 7.

S T E P 2

Find Wall Studs

¡ Using a stud nder, locate the studs to which you'll attach your eNook.

S T E P 4

Attach Screws to Wall Studs

¡ Using a 1/8" drill bit, drill one hole into a stud

about

1-1/2" deep. How do you make sure that hole

1-1/2" deep? Measure that length on your drill

bit and mark it with a piece of masking tape.

Stop drilling when you reach the masking tape.

¡ Using a Phillips driver (or a power driver with

a Phillips bit), attach the rst 1-1/2" long screw

at that mounting point, but don’t tighten all

the way to the wall. Stop tightening when the

screw head is about 1/4" away from wall.

S T E P 3

Determine Mounting Point

¡ Determine the optimal desk height for your

eNook. Typical sitting height is about 29" high;

typical standing height is about 42" high.

¡ Measure up 14-3/4" from the shelf location and

mark that point on one stud.

Product specificaties

Merk:	Ergotron
Categorie:	Bureau
Model:	eNook
Kleur van het product:	Chocolade
Breedte:	895.4 mm
Diepte:	184.2 mm
Hoogte:	647.7 mm
Gewicht verpakking:	31300 g
Afmetingen verpakking (BxDxH):	787.4 x 330 x 990 mm
Maximale gewichtscapaciteit:	22.68 kg
Frame materiaal:	Staal
Zwenkwieltjes:	Nee
Materiaal tafelblad:	Houtvezelplaat
Materiaal afwerking tafelblad:	Laminaat