Ergotron Dock Locker Handleiding

Ergotron Carkit Dock Locker

Lees hieronder de 📖 handleiding in het Nederlandse voor Ergotron Dock Locker (4 pagina's) in de categorie Carkit. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

www.ergotron.com

email: sales@ergotron.com

USA 1-800-888-8458

Europe +31 (0)33-45 45 600

China 86-769-86018920

Ergotron, Inc. | 1181 Trapp Road | St. Paul, MN 55121 USA

A S S E M B LY I N S T R U C T I O N S

Anthro Corporation | 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Ergotron Dock Locker

for Microsoft Surface Pro 3

and Docking Station

NOTE: Shown with Microsoft Surface Pro 3 and Docking Station, not included.

Product Part#

Dock Locker MLDKYCG

Anthro Corporation is a wholly owned subsidiary of Ergotron Inc., and Ergotron Inc. is a Nortek Company

Revision: January 2015

WELC O ME

Thank you for purchasing the Dock

Locker for Microsoft Surface Pro 3

Docking Station.

If you have any questions or if we can

help you in any way, please contact us

at 800.325.3841.

TOOL S

A power drill and drill bit (either 1/4"

or 1/8" depending on your installation

method) may be required for this

assembly.

A Phillips screwdriver and 3/8" socket or

nut driver may also be required.

These tools are included with your

shipment:

5/32" hex driver bit

5/32" hex Anthro driver

3-way wrench

PAR TS LIST

Before beginning installation of your Dock Locker, please

review the parts list to verify that your shipment is complete.

The fastener quantities listed are the minimum required to

complete the installation. Your shipment may have included

extras.

Product Quantity Part Number

01 Locker Assembly 1 835-MLD

A. Top Cap 1 225-4931-00

B. Bottom Plate 1 225-4957-00

02 #10-24 x 2.5" Bolt 2 325-5747-00

03 #10-24 Nylock Nut 2 325-5186-00

04 #10-9 x1" PB Screw (not shown) 2 325-5580-00

KEYS

For replacement keys, order part number

979KY.

Ergotron Dock Locker Assembly Instructions 3

STEP 1 - SET TH E DOCK LOCKER IN PLACE AND OPEN IT

Select the installation location for your locker. Provide at least 5" of clearance behind the unit.

Place the unit in its spot and open it. To unlock the unit, insert the key and turn. To open the unit, push the button on

the lock and lift the cover back.

IF YOU WILL SECURE YOUR LOCKER TO THE WORKSURFACE USING A

BOLT-THROUGH OR SCREW-MOUNT METHOD, GO TO STEP 2.

IF YOU WILL SECURE YOUR LOCKER TO THE WORKSURFACE WITH

A SECURITY CABLE, OR IF YOU WILL NOT SECURE YOUR LOCKER, GO TO STEP 3.

STEP 2 - SECURE YOUR DOCK LOCKER WITH

SCREW -MOUN T OR BOLT-THR O U G H METHOD.

Locate the two round installation holes near the back of the bottom plate.

Mark the holes. Set aside the unit.

Pre-drill the holes. For screw-mount installation, use a 1/8" drill bit to drill

1/2" into the worksurface. For bolt-through installation, use a 1/4" drill bit to

drill all the way through the worksurface. For added security for your cords and

cables, you can route them through the cord pass-through opening in the base

plate. To use that pass-through, mark and drill an opening in your worksurface

now.

Attach the unit to the worksurface. For screw-mount installation, fasten the

unit to the worksurface with two 1" PB screws (325-5580-00) using your drill

and the Anthro driver bit provided. For bolt-through installation, slide one

bolt (325-5747-00) through each hole in the bottom plate and through the

worksurface. Capture with the #10-24 Nylock Nut (325-5186-00).

9-1/8"

1” Button Hd PB Screw

325-5580-00

Nylock Nuts

325-5186-00

10-24x2.5” Bolt

325-5747-00

Product specificaties

Merk:	Ergotron
Categorie:	Carkit
Model:	Dock Locker
Kleur van het product:	Black, Grey
Gewicht:	2800 g
Breedte:	376 mm
Diepte:	178 mm
Hoogte:	190 mm
Gewicht verpakking:	3200 g
Breedte verpakking:	432 mm
Diepte verpakking:	254 mm
Hoogte verpakking:	254 mm
Ingebouwde luidsprekers:	Nee
Certificering:	TAA
Correct gebruik:	Binnen
Materiaal:	Metaal
Compatibiliteit:	Microsoft Surface Pro 3
Type mobiele apparatuur:	Tablet/UMPC