Epson EcoTank ET15000 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Epson EcoTank ET15000 (4 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User’s
Guide.
Important Safety Instructions: When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson® product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution: To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1 Unpack
Note: Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1 Remove all protective materials from the product.
2 Lift up the scanner unit until it locks into place and
remove all protective materials from inside the product.
Caution: Do not touch the flat white cable or the ink tubes and
their translucent cover.
2 Fill ink tanks
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution: This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
1 Make sure that the transportation lock is in the down
position.
2 Open the ink tank cover, then open the cap for the
black ink. Refer to the color-coded sticker to identify the
color of each tank.
3 Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution: Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
4 Insert the ink bottle into the filling port.
Note: Do not force the bottles into position; they are keyed for
each color.
ET-15000
ET15000 SH E CPD58144 indd 1
12 Raise the control panel, then press the power button to
turn on the product.
Note: If an error message appears, turn off the product and
check that no protective material has been left inside the
product.
13 Select your language, country, date, and time.
Note: You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
Follow steps 14 and 15 to continue ink charging.
14 When the message to see the sheet appears Start Here
on the LCD screen, press and hold the help button for
5 seconds.
15 When the ink confirmation message appears on the LCD
screen, select to start charging the ink. Ink charging Done
takes approximately 10 minutes.
Caution: Do not unplug or turn off the product, raise the
scanner unit, or load paper while the product is charging or you’ll
waste ink.
Note: The included ink bottles are designed for reliable printer
setup and cannot be resold. After setup, the remaining ink is
available for printing.
16 To complete filling the ink tanks, repeat steps 1 through 7
using the remaining ink in the bottles.
Note: Replace the bottle cap before disposing of the bottles.
17 Close the ink tank cover and scanner unit.
18 Select Next and follow the on-screen instructions to reset
the ink levels.
19 Follow the on-screen instructions to adjust the print
quality.
Note:
• You need to load paper before you can adjust the print quality. See
“Load paper” on the back of this sheet for details.
• You can change these settings later using the product’s control
panel. For more information, see the online User’s Guide.
5 Wait for the ink to fill the tank.
Do not squeeze the bottle.
Note: Ink flows into the tank and
stops automatically when the ink is
filled to the upper line. If ink does
not flow from the bottle, lift and
reinsert the bottle.
Caution: After setup, periodically
inspect the ink level to ensure it
is not below the lowest line on
the tank. Prolonged use when
ink is below the lowest line could
damage the product. See the
online User’s Guide for refilling
instructions.
6 When the ink tank is full, remove the ink
bottle and securely close it with the cap.
Place the remaining ink aside; you will
need it later.
Note: Do not leave the ink bottle inserted;
otherwise the bottle may be damaged or ink
may leak.
7 Close the ink tank cap.
8 Repeat the previous steps for the other colors.
9 Close the ink tank cover.
10 Lift the scanner unit up slightly and lower it. When
the scanner unit catches, lift it up again and lower it
completely.
11 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
5 Install software
Note: If you are using a Mac or your computer does not have a CD/
DVD drive, an Internet connection is required to obtain the product
software.
1 Make sure the product is to your NOT CONNECTED
computer.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
2 Insert the product CD (Windows only) or download and run your
product’s software package. For the latest software, visit
www.epson.com/support/et15000 (U.S.) or
www.epson.ca/support/et15000 (Canada).
3 Follow the instructions on the computer screen to run the
setup program.
4 When you see the Select Your Connection screen, select
one of the following:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have a USB cable (not included).
• Wired network connection
Make sure you have an Ethernet cable (not included).
Mobile and voice-activated
printing
• Print directly from your Android™ (v4.4 or later) device*.
Simply connect your printer and device to the same network
and tap the menu icon to select the print option.
• Print from wherever you are, next to your printer or remotely,
with Epson Connect™. Learn more at
www.epson.com/connect (U.S.) or
www.epson.ca/connect (Canada).
• Use voice-activated assistants to print a variety of creative
and everyday items from your Epson product. Simply add
your product to an Epson Connect account, then link the
account to a voice-activated assistant. See
www.epson.com/voice www.epson.ca/voice (U.S.) or
(Canada) for more information.
* May require the Epson Print Enabler or Mopria Print Service app from
Google Play™.
3 Load paper
See the online User’s Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the ADF.
1 Make sure the product is not charging ink, and then open
the front of the paper cassette and pull out the paper
cassette.
2 Slide the side edge guides all
the way out.
3 Insert paper with the glossy or
printable side down.
Note: Make sure the paper is
loaded against the front edge
guide and not sticking out from
the end of the cassette.
4 Slide the side edge guides
against the paper, but not
too tightly. Close the front
of the cassette.
5 Keep the cassette flat as
you insert it all the way.
6 Pull out the output tray.
7 Select the paper settings on the
product’s control panel.
4 Connect the fax line
1 Connect a phone cord to a telephone wall jack and to the
LINE port on your product. See the online User’s Guide
for more information.
2 Select to set up the fax, or select Proceed Set Up Later
to set it up later.
Any problems?
Product specificaties
| Merk: | Epson |
| Categorie: | Printer |
| Model: | EcoTank ET15000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Epson EcoTank ET15000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Printer Epson
8 April 2024
13 Maart 2024
13 Maart 2024
26 Februari 2024
26 Februari 2024
9 Januari 2024
9 Januari 2024
9 Januari 2024
29 November 2023
26 Augustus 2023
Handleiding Printer
- Printer HP
- Printer Sony
- Printer Samsung
- Printer Xiaomi
- Printer Panasonic
- Printer LG
- Printer Huawei
- Printer Canon
- Printer Honeywell
- Printer Olympus
- Printer Toshiba
- Printer Xerox
- Printer Brother
- Printer Builder
- Printer Dell
- Printer Digitus
- Printer Dymo
- Printer Frama
- Printer Fujifilm
- Printer Fujitsu
- Printer Ibm
- Printer Intermec
- Printer Kodak
- Printer Konica Minolta
- Printer Kyocera
- Printer Lenovo
- Printer Lexmark
- Printer Minolta
- Printer Mitsubishi
- Printer MSI
- Printer Nec
- Printer Paxar
- Printer Polaroid
- Printer Primera
- Printer Renkforce
- Printer Ricoh
- Printer Roland
- Printer Royal Sovereign
- Printer Sagem
- Printer Seiko
- Printer Sharp
- Printer Star
- Printer Thomson
- Printer Tomy
- Printer Toshiba TEC
- Printer Triumph-Adler
- Printer Velleman
- Printer Zebra
- Printer Oce
- Printer Oki
- Printer Olivetti
- Printer Olympia
- Printer Argox
- Printer DTRONIC
- Printer Metapace
- Printer Citizen
- Printer Nilox
- Printer Approx
- Printer Ultimaker
- Printer Bixolon
- Printer Brady
- Printer GoDEX
- Printer Testo
- Printer EC Line
- Printer Pantum
- Printer DNP
- Printer TSC
- Printer Equip
- Printer StarTech.com
- Printer Fichero
- Printer GG Image
- Printer Posiflex
- Printer ZKTeco
- Printer Star Micronics
- Printer Datamax-O'neil
- Printer Panduit
- Printer Dascom
- Printer HiTi
- Printer Vupoint Solutions
- Printer Elite Screens
- Printer Phoenix Contact
- Printer Colop
- Printer Raspberry Pi
- Printer Evolis
- Printer IDP
- Printer Fargo
- Printer Microboards
Nieuwste handleidingen voor Printer
26 April 2024
26 April 2024
26 April 2024
17 April 2024
17 April 2024
9 April 2024
9 April 2024
8 April 2024
5 April 2024
5 April 2024