Epson Artisan 710 Handleiding

Bekijk gratis de handleiding van Epson Artisan 710 (4 pagina’s), behorend tot de categorie Printer. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over Epson Artisan 710 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

*411702700*

*411702700*

If anything is missing, contact Epson as described on the back.

Caution:Do not open ink cartridge packages until you are ready to install the ink.

Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove sticker(s) from the backing sheet and

place over the corresponding text on the control panel.

Remove all protective materials including from inside the paper cassette.

1Lift the scanner and remove the transportation lock.

2Store the transportation lock as shown.

3Close the scanner.

Unpack

1

Start Here

3Slide the edge guides against the paper.

4Lower the photo tray.

5Squeeze the edge guides and slide them out. Then insert 4 x 6-inch or

5 x 7-inch photo paper with the glossy or printable side face-down.

Note:Make sure the paper fits under the edge guide.

6Slide the edge guides against the paper.

7Keep the cassette flat as you insert it.

8Extend the output tray and flip up the stopper.

5

Load paper

(Included for

Canada only)

1Connect the power cable.

Caution:Do not connect to your computer yet.

2 Press theOn button, then raise the control panel.

To lower the control panel, press the Unlock button.

Caution:To avoid damaging your Artisan 710 Series, always press the Unlock

button to lower the control panel.

Note: For more information on using and adjusting the control panel, see your

Quick Guide.

Turn on and adjust

2

Series

The paper cassette has 2 trays. The main tray is for letter-size, legal-size,

or 8 x 10-inch paper. The photo tray is for 4 x 6- or 5 x 7-inch photo paper.

1Pull out the paper cassette. Then slide back the photo tray and lift it up.

2Squeeze the edge guides and slide them out. Then insert paper with the

glossy or printable side face-down.

Power cord

Install ink cartridges

4

Note:Do not load paper yet.

1 Lift up the scanner.

Select language

3

Pressorto select your Language, then press OK.

2Unpack the ink cartridges.

3Remove only the yellow tape from each cartridge.

Caution:Don’t remove any other seals or the cartridges may leak.

4Insert the cartridges in the holder for each color. Press each cartridge

down until it clicks.

5Lower the scanner.

6Wait while ink charges. Charging takes about 5 minutes.

Note:Your Artisan 710 Series ships with full cartridges and part of the ink

from the first cartridges is used for priming the Artisan 710 Series. Replacement

cartridges will print more pages.

Caution:Don’t turn off the Artisan 710 Series while the ink system is charging

or you’ll waste ink.

Product specificaties