Enttec 8PX60-12-B Handleiding
Enttec
Niet gecategoriseerd
8PX60-12-B
Bekijk gratis de handleiding van Enttec 8PX60-12-B (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.2 sterren uit 16.5 reviews. Heb je een vraag over Enttec 8PX60-12-B of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
8PX60-12-B Datasheet
For latest version visit:
www.enttec.com
8 February 2019 M-file ID 4902755 Page|1
8PX60-12-B
12 V 60 PIXEL/METER BLACK STRIP
Features
• RGB, 3 in 1 full colour LED pixel strip.
• Individually addressable led pixels, suitable
for stage, entertainment and architectural
applications
• 60 Pixels/meter density
• Designed for use with ENTTEC Pixel products
• Maximum 8.5 Watts/Metre
• WS2815 chips built into 5050 RGB LEDs
• 256 grayscale
• 120-degree illumination without dark area
• 3M adhesive double side tape at the back
• Built-in data signal reshaping circuit
• 12V DC input supply voltage
• Flexible construction material
• Small LED pitch
• Can be joined together
• Can be cut into a smaller length
• IP20 Indoor use only
• Back up data line BI/BO (In/Out)
Physical Dimensions
Note
All dimensions are in mm
Safety
• Do not expose this pixel strip to rain
• Do not allow liquid to build up around the pixel
strip.
• Do not exceed the rated 12V DC power supply.
• Please adhere to installation instruction sheet
• This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
• Do not put excess pressure on the pixel strip,
as it can damage the LEDs.
• Pixel strips produce heat; ensure proper
thermal management with the use of
extrusions
Ordering Information
Part Number
Description
8PX60-12-B
RGB PIXEL STRIP 60
LEDs/METER 12V –
5meter roll BLACK
8PX60-12-B Datasheet
For latest version visit:
www.enttec.com
8 February 2019 M-file ID 4902755 Page|2
Voltage Drop of Pixel Strip
• The graph shows the voltage drop for each
meter of pixel strip when all pixels are white
(RGB channels fully on)
• The pixel strip had single injection as shown in
the wiring diagram below
• For more information on maximum run length
refer to the installation sheet
Specifications
Note
Power measurements calculated using 1m pixel strip
driven at 12V
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are
subject to change without notice.
Wiring Diagrams
20%
30%
40%
0
1
2
3
4
5
6
7
8
9
10
11
12
0 1 2 3 4 5 6 7 8 9
Voltage (V)
Meters of Pixel Strip powered on (m)
Voltage Drop for each Meter of
Pixel Strip (All Pixels White)
Item
8PX60-12-B
Input Voltage
+11.7V ~ +12.2VDC
Data line Voltage
-0.5V ~ VCC+0.5V
Watts/meter (max)
All (RGB)
8.5
Lumens/meter
RGB: 122
Efficacy (Lm/Watt)
14.9
DMX Channels/LED
3
Beam angle
120 °
Control protocol
WS2815
Connector
JST SM connectors
Weight (5m roll)
115 g
Operating
temperature
-20°C to 55 °C
Pixel Mapping
Order
GRB
Front polymer
encapsulation seal
No
IP Rating
20
PCB Colour
Black
Product specificaties
| Merk: | Enttec |
| Categorie: | Niet gecategoriseerd |
| Model: | 8PX60-12-B |
Heb je hulp nodig?
Als je hulp nodig hebt met Enttec 8PX60-12-B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Enttec
27 Augustus 2025
28 Mei 2024
Handleiding Niet gecategoriseerd
- Paladin
- CEEM
- Gitzo
- Clever Family Homes
- Zoetis
- IRIS
- Extech
- SKROSS
- Starburst
- Elite Force
- Kayser
- Anthem
- Swann
- Bissell
- Cat & Hound
Nieuwste handleidingen voor Niet gecategoriseerd
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025
15 September 2025