Entrematic Superior plus 42 TOF Handleiding

Entrematic Garagepoortopener Superior plus 42 TOF

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Entrematic Superior plus 42 TOF (24 pagina's) in de categorie Garagepoortopener. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Installation instruction/
User manual
TOF, TOR
GB
Superior+ 42
Superior 42
K088109
1416
๎€๎€Œ๎€‚๎€Š๎€Š๎€ƒ๎€‚๎€‹๎€
Installation instruction/
User manual
TOF, TOR
GB
Superior+ 42
Superior 42
K088109
1416
๎€๎€Œ๎€‚๎€Š๎€Š๎€ƒ๎€‚๎€‹๎€
GB
Extract of Declaration
of
Conformity
/ Performance
We, Entrematic Group
AB Lodjursgatan 10
SE-261 44 Landskrona
Sweden,
Declare under our sole responsibility that our power or manually operated door types Superior 42 and
Superior+ 42, are in compliance with the following legislation:
305/2011
2006/42/EC
2004/108/EC
Construction Product Regulations (CPR)
Machinery Directive (MD), if power operated
Electromagnetic Compatibility Directive (EMCD), if power operated
Harmonized European standards which have been applied:
EN 13241-1:2003
For power operated doors also:
EN 61000-6-2 EN 61000-6-3 EN 60204-1 EN 60335-1
Other standards or technical specifications, which have been applied for power operated doors:
EN 60335-2-103
EC type examination or certificate issued by a notified or competent body (for full address, please contact
Entrematic Group AB) concerning the equipment:
SP: 0402
The manufacturing process ensures the compliance of the equipment with the technical file. The
manufacturing process is regularly assessed by 3rd party.
Compilation of technical file:
Ed Dubbeld
Entrematic Group
AB Lodjursgatan 10
SE-261 44 Landskrona
Sweden
E-mail: ed.dubbeld@entrematic.com
ATTENTION!
This contains information, which must be strictly
observed to avoid damage to the door
3
Where โ€˜leftโ€™and โ€˜rightโ€™ hands are specified, the door
is always viewed from inside the garage looking out-
wards.
These instructions show right hand side parts.
The manufacturer shall not be held liable for damage
or operational faults due to non-compliance with these
installation instructions. For safety, unauthorised
modification or alterations of this door are not permit-
ted. Modification of this door, its operational parts or
GENERAL & INTRODUCTION
DOOR VARIATIONS
This sectional door is supplied with one of two dif-
ferent balancing systems. Most installation steps shown
in these instructions cover these two systems. Where the
steps differ for each balancing system, symbols are shown
to guide you to follow the system supplied with your door.
Please take a minute to familiarise yourself with the sym-
bols (shown below). The clearances required for installa-
tion are also shown.
When installing an electric operator to this door, always
consult the installation instructions supplied with the ope-
rator.
INSTALLATION CLEARANCES REQUIRED FOR EACH BALANCING SYSTEM
*When B = 1900 mm add 100 mm to the depth shown
the attachment of additional door weight will lead
to invalidation of the door guarantee.
The installation of a garage door requires technical
knowledge and skills. The manufacturer shall not be
held liable for any damages or injuries incurred
during installation. If you are in any doubt about
your ability to install this door correctly and safely,
contact a qualified tradesperson.
Prior to installation, this garage door must be stored in a
dry, sheltered place, protected from risk of damage and /
or loss of components.
STORAGE
The fixings supplied with this door are for use in general
brickwork, walls, ceiling, timber, steel and concrete. If
this door is to be installed to any other material or if the
structure is of poor quality, it is the responsibility of the
installer to use suitable, good quality, fixing items. These
are readily available through trade outlets. It is important
to use plugs and fastening screws with washers that are
suitable for the type of masonry involved, with a minimum
screw diameter of 8 mm. An option kit of installation
brackets can be used to fix the wall tracks (require extra
side room 40 mm).
SAFETY
Ensure that the springs of the torsion spring unit are not
damaged during transit, storage or installation.
Important instructions and notes are highlighted as
follows:
They identify operations and information, which must be
strictly observed and followed to avoid endangering per-
sons or damage to the door.
This identifies operations, which must be
strictly observed to avoid endangering
persons.
CAUTION
For your safety, please read these instructions
thoroughly and ensure you understand them
before starting the installation.
These installation instructions are supplied together
with an illustration plan. Please keep both together in
a safe place for future reference .
!
!
Clearances Required Side
room Headroom
Manual Depth*
Manual Headroom
El-operated Depth
El-operated
80 150 B+700 150 B< 2250 = 3445
Tension (low headroom) (TEL)
Torsion (front) (TOF)
80 200 B+700 200 B< 2250 = 3445
B> 2375 = 4450
Torsion (rear) (TOR)
80 100 B+800 120 B< 2250 = 3445
B> 2375 = 4450


Product specificaties

Merk: Entrematic
Categorie: Garagepoortopener
Model: Superior plus 42 TOF

Heb je hulp nodig?

Als je hulp nodig hebt met Entrematic Superior plus 42 TOF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Garagepoortopener Entrematic

Handleiding Garagepoortopener

Nieuwste handleidingen voor Garagepoortopener