Engenius SP-980 A SIP Gateway, Server, Client & Trunk Handleiding

Engenius Router SP-980 A SIP Gateway, Server, Client & Trunk

Lees hieronder de 📖 handleiding in het Nederlandse voor Engenius SP-980 A SIP Gateway, Server, Client & Trunk (73 pagina's) in de categorie Router. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/73

2/9/2007 IP PBX Administration Guidelines MAG-07003 Rev. B

IP PBX Administration Guidelines

Version 1.5E

TABLE OF CONTENTS

1 Introduction.......................................................................................................................................1

1.1 Overview .......................................................................................................................1

1.2 Platform Category .........................................................................................................2

1.3 Installation.....................................................................................................................2

2 System Configuration .......................................................................................................................4

2.1 PBX System..................................................................................................................4

2.2 Time Setup....................................................................................................................4

2.2.1 System Time Zone ...............................................................................................4

2.2.2 Real Time Clock (RTC) Setup..............................................................................4

2.3 On-board WAN Setup ...................................................................................................5

2.3.1 Static IP ................................................................................................................5

2.3.2 DHCP ...................................................................................................................5

2.3.3 PPPoE..................................................................................................................5

2.3.4 LAN Only ..............................................................................................................5

2.3.5 MAC Clone ...........................................................................................................6

2.4 On-board LAN Setup.....................................................................................................6

2.5 LAN Routing..................................................................................................................6

2.5.1 Add a Route .........................................................................................................6

2.5.2 Edit a Route..........................................................................................................6

2.5.3 Delete a Route .....................................................................................................7

2.6 Dynamic DNS Setup.....................................................................................................7

2.6.1 Enable Dynamic DNS...........................................................................................7

2.6.2 Disable Dynamic DNS..........................................................................................7

2.7 QoS Setup.....................................................................................................................7

2.7.1 Enable QoS..........................................................................................................8

2.7.2 Disable QoS .........................................................................................................8

2.8 Virtual Server ................................................................................................................8

2.8.1 Add a Service .......................................................................................................8

2.8.2 Edit a Service .......................................................................................................8

2.8.3 Delete a Service...................................................................................................9

2.9 Maintenance..................................................................................................................9

2.9.1 Storage Backup....................................................................................................9

2.9.2 SIP UA..................................................................................................................9

2.9.3 CDR Log...............................................................................................................9

2.9.4 System Events...................................................................................................... 9

2.9.5 Active Calls.........................................................................................................10

2.10 Firmware Upgrade ...................................................................................................... 10

2.11 Shutdown .................................................................................................................... 11

2.12 Logout ......................................................................................................................... 11

3 Service Configuration ..................................................................................................................... 12

3.1 NTP Service ................................................................................................................ 12

3.1.1 Enable NTP Service ...........................................................................................12

3.1.2 Disable NTP Service .......................................................................................... 12

3.2 SNMP Service.............................................................................................................12

3.2.1 Enable SNMP Service........................................................................................12

3.2.2 Disable SNMP Service .......................................................................................12

3.3 STUN Service .............................................................................................................13

3.3.1 Enable STUN Service ........................................................................................13

3.3.2 Disable STUN Service........................................................................................13

3.4 TFTP Service .............................................................................................................. 13

3.4.1 Enable TFTP Service ......................................................................................... 13

3.4.1.1 Change Directory.......................................................................................13

3.4.1.2 Add a Folder ..............................................................................................14

3.4.1.3 Delete a Folder ..........................................................................................14

3.4.1.4 Download a File......................................................................................... 14

3.4.1.5 Delete a File............................................................................................... 14

3.4.1.6 Upload a File..............................................................................................14

3.4.2 Disable TFTP Service.........................................................................................14

3.5 DHCP Service.............................................................................................................15

3.5.1 Enable DHCP Service ........................................................................................15

3.5.1.1 Add DHCP Range......................................................................................15

3.5.1.2 Edit DHCP Range......................................................................................15

3.5.1.3 Delete DHCP Range..................................................................................15

3.5.1.4 Show Clients..............................................................................................15

3.5.2 Disable DHCP Service .......................................................................................16

iii

Product specificaties

Merk:	Engenius
Categorie:	Router
Model:	SP-980 A SIP Gateway, Server, Client & Trunk
Kleur van het product:	Zwart
Frequentie van processor:	533 MHz
Processormodel:	Intel IXP425BD
Stemcodecs:	G.723.1, G.726
Connectiviteitstechnologie:	Bedraad
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aantal USB-aansluitingen:	4
Aansluiting voor netstroomadapter:	Ja
Intern geheugen:	64 MB
Type processor:	Ja
Aansluitingen:	2 x FXO\n2 x FXS
Aantal gebruikers:	30 gebruiker(s)
Flash memory:	16 MB
DHCP server:	Ja
Quality of Service (QoS):	Ja
DHCP client:	Ja
Max. overdrachtssnelheid:	0 Gbit/s
Beheerprotocollen:	PPPoE/Static IP
ISDN-aansluiting:	Nee

Heb je hulp nodig?

Als je hulp nodig hebt met Engenius SP-980 A SIP Gateway, Server, Client & Trunk stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag