Energy Sistem Linnker 5000 Handleiding

Energy Sistem Hoofdtelefoon Linnker 5000

Lees hieronder de 📖 handleiding in het Nederlandse voor Energy Sistem Linnker 5000 (4 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

User’s Guide

1.Assemble and disassemble the ear-hook

with the Headset

(1)To assemble the ear-hook with the

Headset, push the toggle of the ear-phone

into the pin-hole of the ear-hook. To disassemble the ear-hook with the Headset, just

turn and pull out the toggle of the ear-phone from the pin-hole of the ear-hook.

(Please refer to Fig.1)

(2)Fit the ear-hook with your right or left ear. (Please refer to Fig.2, Fig3, Fig4, and

Fig.5)

Fig.1 Fig.2 Fig.3 Fig.4 Fig.5

2.Charging the battery:

(1)The Plug the travel charger into the AC outlet and then connect the charger

into the DC input of the headset. The red indicator of the

headset will light on. When the battery is full, the red

indicator will be off. Disconnect the adaptor from the headset.

When the battery is new, it is not fully charged. It takes nearly

4 hours to fully charge the battery. Afterwards, it will take

nearly 2 hours to fully charge the battery.

(2)If there is a USB charging cable included (optional), you

can charge the headset with the USB charging cable. Please

plug one end of USB charging cable to USB slot of your Fig.6

computer, another end to DC input of the headset. The following

is the same with the travel charger.

(Please refer to Fig.6.)

3.Turning the headset on or off:

(1)Press the “Button 1” for nearly 3 seconds.

You will hear two beep sounds and the blue

indicator will begin to flash. The headset is now

powered on.

(2)When the power is on, press the “Button 1”

for 3 seconds. You will hear two beep sounds

and the red indicator will flash. Now the

headset is turned off. (Please refer to Fig.7 and

Fig.8.) Fig.7 Fig.8

4.Pairing the headset:

(1)The headset must be powered off before you begin to initiate the pairing. Press

the “Button 1” till the blue and red indicators begin to flash alternatively. The

headset is now in pairing mode.

(2)Initiate the pairing process of your bluetooth mobile phone.

(Please refer to the manual of your mobile phone.)

(3)When asked the PIN code, please enter “0000” to

successfully complete the pairing process.

(4)When the pairing process is successfully completed, the blue

indicator will flash. The headset is now in standby mode.

(5)After the headset is successfully paired with your mobile

phone. In some case, you will still have to connect the headset

with your mobile phone. (Please refer to the mobile phone

manual.) (Please refer to Fig.9.) Fig.9

Note:

(1)If the headset is not in pairing mode, your mobile phone can not find the headset.

Please set the headset into pairing mode before you start to pair the headset with

your phone.

(2)If no pairing is possible over a period of time (Aprox. 1 minute), the pairing

process will be stopped. You have to repeat STEP 4 to successfully complete the

pairing.

5.Answering or ending calls:

When the headset is paired with your phone, and when there is an incoming call, you

will hear a musical ring. Then press the “Button 1” to answer the call. When there is

a call in session, you can press the “ Button 1 ” to end the call.

Note:

Because of the different design of some mobile phones, a

disconnection may automatically happen even when the

headset is powered on. In this case, the headset will not ring if

there is an incoming call. Press “Button 1” for 1 second to

re-connect the headset with the mobile phone for an incoming

call.(Please refer to Fig.10.)

Fig.10

6.Making calls:

(1) Voice-dialing:

Press the “Button 1”. After hearing a beep sound, say the name of the person you

recorded on your phone. (The availability of this function depends on the design of

the mobile phone you use. Please refer to the manual of your mobile phone for the

voice-dialing function. )

(2)Dial the phone number on you mobile phone as you normally do. The sound will

be transmitted to the headset automatically.

7.Changing the volume of the Headset:

(1) Press the “Button 2” to increase the listening volume of the headset.

(2) Press the “Button 3 ” to decrease the listening volume of the headset.

(3) You can also adjust the volume from your mobile phone. Please refer to the

manual of your mobile phone.

8.Redialing the call:

After ending the call, you can press the “Button 2” to redial the call you just ended.

(The availability of this function depends on the design of the mobile phone you use.

Please refer to the manual of your mobile phone.)

9.Mute function:

You may have to keep a call on line while talking to others. Push the “Button 2” and

the “Button 3” at the same time for one second. You will hear continuous beep

sounds. Now the headset is in “Mute function” mode. To disable the “Mute

function”, press the “Button 2 ” and the “Button 3” at the same time once again.

10.Rejecting a call

When there is a call in session, you can press the “Button 1” for three seconds to

reject a call.

Function of Buttons:

Button 1: Turning on or turning off the headset, Pairing, Answering or Ending a call,

Voice-Dialing, Rejecting a call

Button 2: Volume-up, Redial

Button 3: Volume-down

Button 2 + Button3: Mute function

Trouble-Shooting:

1.The red indicator flashes:

It indicates that headset is in low-battery. Charge the battery until the red indicator is

turned off.

2.If no connection between the headset and your phone:

Make sure that the bluetooth headset fully charged. Repeat the step 3 to complete the

pairing process. Make sure that the headset is within 10 meters of your phone and

that there are no obstructions such as walls or other electronic device between the

headset and your phone. If the steps above do not solve the problem, please refer to

the manual of your mobile phone for

more information.

Note: This headset is complied with Bluetooth Specification 1.2. However, the

interoperability of this headset and other devices is not guaranteed because of the

compatibility.

Product Care:

1.Avoid humidity, liquid or moisture as this device is not water-proof.

2.Avoid high and low temperature, especially in a car.

3.Please do not dissemble the headset.

4.Please do not use chemical, cleaning solvent or strong detergent to clean the

headset. And avoid sharp object.

5.Please do not change or modify the headset. Any change or modification will void

the warranty of the product.

6.Do not dispose the headset into a fire. This may result in an explosion.

7.Use only the attached charger when you charge the headset.

Product specificaties

Merk:	Energy Sistem
Categorie:	Hoofdtelefoon
Model:	Linnker 5000
Kleur van het product:	Zwart, zilver
Gewicht:	10 g
LED-indicatoren:	Ja
Bluetooth:	Ja
Bluetooth-versie:	1.1
Connectiviteitstechnologie:	Draadloos
Headset type:	Stereofonisch
Standby tijd:	140 uur
Compatibele besturingssystemen:	Windows Vista
Compatibele producten:	PS3, Nokia: 8910, 8910i, 6310, 6600, 3650; N-Gage, N6230, 6820; Ericsson:T39m, T68; Sony Ericsson:T68, T68i, T610, T630, P800, P900, Z600; Philips: Fisio820, Fisio 826; Panasonic:X70; Siemens:S55, SX1; Motorola:V525, V600, A760; Sharp: T15, T21, T31
Compatibiliteit:	Multi
Gesprekstijd:	6 uur
Type product:	Headset