Elite Screens Starling Tab-Tension 2 Series Handleiding

Elite Screens Projectiescherm Starling Tab-Tension 2 Series

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens Starling Tab-Tension 2 Series (7 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

Rev. 08 - 1 /15/17 JA www.elitescreens.com

Electric Wall/Ceiling Projecon Screen

Starling Tab-Tension Series2

For: CineWhite (Mae White) and

CineGrey 5D® (Ambient Light Rejecng) models

User’s Guide

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedures below.

Cauon: The screen’s Black Top Drop is already set to its maximum drop distance. There is extra Black Top Drop in NO

the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved changes or modicaons

(except for cung the power cord for hardwire installaons) to this unit are prohibited and will void your warranty. For

more informaon, please contact our Technical Support Dept. at (877) 511-1211 Ext. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

• Handle the unit carefully during transportaon to avoid any damages.

• To ensure safe and reliable operaon, direct connecon to a properly grounded power source is

advised.

• The power outlet supplying power to the unit should be close to the unit and easily accessible.

• Do not install the unit on uneven or inclined surfaces.

• Do not put heavy objects on the power cord and posion it properly to avoid creang a trip obstacle.

• Never overload the power cord to prevent an electric shock or re due to a loose contact or a short

circuit.

• There are not user serviceable parts in this unit. Do not aempt to disassemble this unit by yourself.

No one except authorized technicians can open and make repairs to this unit.

• Make sure the power source this unit is connected to has a connuous power ow.

• If there is need to use an extension cord, make sure the cord has an equal rang as the appliance to

avoid overheat.

• Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

• Disconnect the power cord under the condions of heavy rain, wind, thunder or lightning.

• Avoid direct Sunshine, rain shower and moisture.

• Keep away from re sources and high temperature to prevent this device from overheang.

• Cut o the power supply rst before transportaon or maintenance.

• Fully disconnect from the power supply when the unit is not in use for a long period of me, as should

be done with any other electric household appliance.

• To avoid possible injury and/or an electric shock, do not aempt to use the screen if there is obvious

damage or if there are any evident broken parts.

Rev. 08 - 2 /15/17 JA www.elitescreens.com

Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled posion on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign

parcles such as dust, sawdust, and/or liquids.

Installation Warning

Due to various installaon environments, the instrucons provided in this user’s guide are for reference

only. Please consult a professional installaon company for further installaon and safety advice. The

installer must ensure that proper mounng hardware is used to provide adequate strength suitable for the

installaon. Elite Screens is not liable for any faulty installations.

Individual modicaons to this product are prohibited and will void the manufacturer warranty. Please

contact Elite Screens Customer Service for any quesons.

These limits are designed to provide reasonable protecon against harmful interference in a residenal

installaon. This equipment generates and can radiate radio frequency energy and, if not installed and used in

accordance with the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that the interference will not occur on a parcular installaon. If this

equipment causes harmful interference to radio or television recepon, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

✓ Reorient or relocate the receiving antenna of the device that may be causing the interference.

✓ Increase the separaon between the screen and the device’s receiver.

✓ Connect the equipment into a dierent power outlet other than the device.

Note

Regardless of the mounng method, the screen should be securely supported so that the vibraon or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must ensure that

the fasteners used are of adequate strength and suitable for the installaon locaon.

Hardware Parts List for the Starling Tab-Tension 2 Series

Please make sure all parts listed below are included before proceeding with the installaon.

A. Pair of Brackets x1

B. Screwdriver x 1

C. Steel Expansion

Concrete Anchor x 8

D. Plasc expansion dry-

wall anchor x 8

E. ST5x40 Self-drilling screws x 8

F. Steel Expansion Concrete

Anchor Hook x 2

G. M6x16 screw x 2

M6 nut x 2

H. Spring Snap Link x 2

Rev. 08 - 3 /15/17 JA www.elitescreens.com

Noce to Installer:

Please use the following installaon instrucons to obtain superior opcal performance from the

CineGrey ® Angular Reecve ALR 5D (Ambient Light Rejecng) Screen.

Make sure to follow these instrucons in order for the CineGrey 5D® to perform correctly.

•Angular-Reflective material is not compatible with ultra/short-throw projectors

•Minimum lens throw rao 1.5x image width

•Ambient light must not come from the same direcon as the projector

Since angular-reflective means that the projected image will reflect at the mirror-opposite

angle, it is important to position the projector so that the viewer will get the best possible

image.

Step 1: Establish the general “eye level” of the viewers

Step 2: Set the appropriate projecon level

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	Starling Tab-Tension 2 Series
Kleur van het product:	Wit
Hoogte:	2067.6 mm
Oorspronkelijke beeldverhouding:	16:9
Montagewijze:	Plafond/muur
Kleur behuizing:	Zwart
Zichtbare schermhoogte (h):	1244.6 mm
Zichtbare schermbreedte (b):	2214.9 mm
Diagonaal:	100 "
Type aandrijving:	Gemotoriseerd
Totale grootte van het scherm (hoogte x breedte):	190.75 x 239.01 cm
Formaat:	HDTV
Schermgain:	1.1
Case L1:	2639.1 mm