Elite Screens Q100V Handleiding

Elite Screens Projectiescherm Q100V

Lees hieronder de 📖 handleiding in het Nederlandse voor Elite Screens Q100V (10 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

Rev043010-JA

www.elitescreenscom info@elitescreens.com

QuickStand Series

Portable Frame-Folding Projection Screen

User s Guide ’

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Setup Procedure

The frame and supports are made of 1 3/8” aluminum tubing with an anodized finish. Please follow the

instructions in this package. With proper care, your QuickStand screen will provide many years of reliable

service.

fig 2

Top

fig 1

fig 3

Lock down the corners

Snap latch

Top

Two Section Frame

(For presentation screens that are less than 120” in diagonal

measurement)

1. Take the frame out of the case and remove its wrappings.

Unfold the main joints as shown in (fig 1).

2. Once the main joints are unfolded, make sure that the snap

latches “click” into the locked position. The frame should now

be fully elongated as in (fig2). *Note: The snap latches will

automatically lock when the joint is straightened. Press the

snap latch button in order to release the lock.

3. While holding the bottom of the frame in place, lift the top of

the frame to unfold the sides which will cause the snap latches

lock when fully extended. Secure the corner braces into the

locked position. The screen frame should now be fully opened

as in (fig 3).

Rev043010-JA

www.elitescreenscom info@elitescreens.com

Three Section Frame

(For large presentation screens that are 120” or more in diagonal

measurement)

1. Take the frame out of the case and remove its

wrappings. Unfold the main joints making sure that

both the end and middle spans are in prefect alignment

as shown in (fig 4).

2. Make sure that the snap latches have locked the joints in

the frame so that it is at its full horizontal extension as

shown in (fig 5)

3. While holding the bottom of the frame in place, lift the

top of the frame to unfold the sides which will cause the

snap latches lock when fully extended. Secure the

corner braces into the locked position. The screen frame

should now be fully opened as in (fig 6).

fig 6

Lock down the corners

Snap latch

Top

fig 4

Product specificaties

Merk:	Elite Screens
Categorie:	Projectiescherm
Model:	Q100V
Kleur van het product:	Zilver
Gewicht:	62300 g
Oorspronkelijke beeldverhouding:	4:3
Zichtbare schermhoogte (h):	1524 mm
Zichtbare schermbreedte (b):	2032 mm
Diagonaal:	100 "
Schermgain:	1.1