Elektrobock CV701 Handleiding
Elektrobock
Luchtbevochtiger
CV701
Bekijk gratis de handleiding van Elektrobock CV701 (4 pagina’s), behorend tot de categorie Luchtbevochtiger. Deze gids werd als nuttig beoordeeld door 72 mensen en kreeg gemiddeld 4.3 sterren uit 36.5 reviews. Heb je een vraag over Elektrobock CV701 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
SENSOR
HUMIDITY
When the set relative humidity (RH) is reached, the
connected device (fan, hood, signaling equipment, etc.).
C
C
C
CV701
V701
V701
V701
CV701
Pb
LEAD FREE
in acco rdanc e
with RoHS
MADE IN CZECH REPUBLIC
MAX.
15-200 W
RH
20-95 %
CV701 is an ideal solution for places where there is a high risk of mold (on
masonry, windows, tiles).
The main function of the CV701 is to control the fan (ventilation) with respect to
the size of the relative humidity (RH) in the room (RH is the percentage of water
vapor content in air at a given temperature compared to air vapor fully saturated at
the same temperature). High RH can cause condensation of water vapor and thus
the formation of mold. Molds not only damage property, but can also seriously
endanger human health (allergies, asthma).
DESCRIPTION
CONSTRUCTION
Remove the terminal cover (Fig.1). Connect the 230V / 50Hz power
supply to the and terminals (the rst two from the right). Connect N L
the device we want to switch to the terminals marked and N, eg the OUT
fan (diagram no. 1). The terminal marked number 1 does not have to be
connected, it is used for connection of external control (diagram no. 2).
After connecting the wires, return the terminal box cover and attach the
CV701 to the installation box.
We always change the fuse for the same type F2A / 1500A, 250V.
Only a person may install and replace the fuse (without voltage)
with the appropriate qualications.
NOTICE
The humidity sensor must be installed at least 1 m from the fan! Select
a location where the sensor will not be aected by direct warm airow
from the heater, sunlight, or other disturbances.
scheme no.1 scheme no.2
230 V/50 Hz 230 V/50 HzL
SETTINGS
At the required humidity (ie whenever we want it to occur
to switch on the connected device) turn the control element (Fig.2)
counterclockwise until the red LED lights up and the connected device
is switched on.
When the set RH value is exceeded, CV701 starts automatically regulate
room ventilation. If the humidity does not reach the set value, the CV701
is inoperative.
When connected with an external switch (diagram no. 2), it is possible to
manually regulate the ventilation regardless of the humidity in the room.
Fig.1 Fig.2
screw
(to remove the cover)
control element
(RH setting)
terminal blocks
(for connecting wires)
red LED
(indication of switching)
position 1
corresponds to
20% RH
(indicative value)
position 10
corresponds to 95%
RH
(indicative value)
Product specificaties
| Merk: | Elektrobock |
| Categorie: | Luchtbevochtiger |
| Model: | CV701 |
Heb je hulp nodig?
Als je hulp nodig hebt met Elektrobock CV701 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Luchtbevochtiger Elektrobock
26 Mei 2023
Handleiding Luchtbevochtiger
- Point
- Comfee
- Sencor
- Basetech
- MPM
- Soehnle
- Vicks
- Haus & Luft
- Sharp
- Olympia
- Argoclima
- Xiaomi
- Ravanson
- Samsung
- Trebs
Nieuwste handleidingen voor Luchtbevochtiger
19 Juli 2025
18 Juli 2025
18 Juli 2025
17 Juli 2025
17 Juli 2025
14 Juli 2025
5 Juli 2025
17 Juni 2025
16 Juni 2025
