Electro-Voice MM2F Handleiding

Bekijk gratis de handleiding van Electro-Voice MM2F (1 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Electro-Voice MM2F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

MM2F TO MM2F-1 CONVERSION

User Instructions

12000 Portland Avenue South, Burnsville, MN 55337

Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

© Telex Communications, Inc. 6/2003

Part Number 38110-269 Rev A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

MM2F-1 Conversion Instructions

Tools required

•Phillips Screwdriver

•Torque Driver With Phillips Bit

•Loctite 222 Threadlocker (or equivalent)

Instructions

1.Position the MM2F face down on a flat surface. The six (6) screws and electrical terminals

shall be facing up.

2.With a Phillips screwdriver, remove one (1) of the six screws from the back housing.

3.Position a stave at location where old screw was removed. Use old screw as a guide to

hold stave in place during next step. (see figure below)

4.Place a drop of Loctite 222 threadlocker (or equivalent) on threads of a new screw

(provided). Torque new screw, with lock washer (provided), to 35 inch pounds.

5.Remove old screw and discard.

Repeat steps 2 through 5 for remaining five staves.

Product specificaties