Electro Harmonix Micro POG Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Micro POG (4 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
MICRO POG
Polyphonic Octave Generator
Congratulations on your purchase of the XO MICRO POG Polyphonic Octave
Generator. What does that mean exactly? Well, the MICRO POG can
simultaneously generate multiple octaves from your input signal. Whether
you play single notes, arpeggios or full chords, the MICRO POG will track,
every note or chord that you play, with precision. With the MICRO POG, you
can mix together your original "dry signal" with two different octaves (one
above and one below your original note) to create totally new inspiring
tones.
-CONTROLS-
DRY Knob Controls the output volume of the DRY signal. The DRY signal
is the signal present at the INPUT jack. As this knob is turned clockwise, the
volume of the DRY signal will increase.
SUB OCTAVE Knob Controls the output volume of the SUB OCTAVE
signal. The SUB OCTAVE signal is one octave below the original input signal,
half the frequency of the input signal. As this knob is rotated clockwise, the
volume of the SUB OCTAVE signal will increase.
OCTAVE UP Knob Controls the output volume of the OCTAVE UP signal.
The UP OCTAVE signal is one octave above the original input signal or twice
the frequency of the original input signal. The volume of the UP OCTAVE
signal will increase as this knob is rotated clockwise.
STATUS LED This LED indicates the current state of the unit. When the
LED is lit up, the box is in EFFECT mode. When the LED is off, the box is in
BYPASS mode. Pressing the Footswitch will toggle between effect and
bypass modes.
INPUT Jack audio input to the POG. The input – This ¼” jack is the
impedance presented at the Input Jack is 2 M .
WARNING: Use only the 9.6VDC/200mA AC adapter the Micro POG
comes supplied with. Do not use any other AC adapters. Using other AC
adapters, even those made by Electro-Harmonix, could cause harm to the
unit, the adapter or you. The Micro POG does not use batteries.
EFFECT OUT Jack - This ¼” jack outputs the effect. The output impedance
at this jack is 250 .
DRY OUT Jack – This ¼” jack outputs a buffered version of the input
signal. The output impedance at this jack is 250 .
9V Power Jack Connect the output plug from the AC Adapter that was
supplied with your Micro POG to this jack, located at the top of the Micro
POG. The Micro POG accepts Boss style AC Adapters.
- OPERATION NOTES -
Here are some very useful sound settings that were designed while
developing the POG. They are perfectly suited for the Micro POG. They can
all be seasoned to your own tastes.
12-string Guitar Turn your 6-string into a 12 string. Set all of the knobs
to 0. Bring up the INPUT knob to about 60%. While you are listening to the
dry signal, rotate the +1 OCTAVE knob clockwise to about 70%.
As an additional hint, combine just a touch of the Sub Bass for body.
8-string/16-string Bass - When used with a 4 string, 5 string and beyond
bass, bring up your dry bass signal and rotate the + 1 octave knob until you
hear the proper balance. A very realistic 8 and 10 string etc bass is easily
obtained. Obviously the more strings that you have the wider the octave
range…all tracking perfectly.
Phat Bass Turn your guitar into a great sounding bass. Set all of the
knobs to 0. Rotate the INPUT Knob up to 50-75%. Set the SUB OCTAVE
knob to its maximum position. Perfect tracking and a really nice bass sound
that can add performance bottom. Perfect for demos in your home studio.
Organ You can do a 3 stop organ that when used with a volume pedal can
be a very interesting pad. Try a little modulation from a Nano Small Stone,
Polyphase, XO Clone theory, Stereo Pulsar or your favorite modulation pedal
for really animated tone.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
info@ehx.com or +1- - -8300. USA and Canadian customers: please obtain a 718 937
Return Authorization Number (RA#) from EHX Customer Service before returning
your product. Include with your returned unit: a written description of the problem
as well as your name, address, telephone number, e-mail address, and RA#; and a
copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the product
was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com


Product specificaties

Merk: Electro Harmonix
Categorie: Hifi systeem
Model: Micro POG

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Micro POG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Electro Harmonix

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem