Electro Harmonix Bass Big Muff Pi 2 Handleiding


Pagina's 3 effectpedaal

Bekijk de handleiding van Electro Harmonix Bass Big Muff Pi 2 gratis online of download de PDF. 2 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

POWER REQUIREMENTS:
Voltage: 9VDC Current: Polarity: 20mACenter-Negative Battery: 9V
This device may be powered by an Electro-Harmonix 9.6DC-200, MOP-D10, or S8 power supply.
Use of the wrong adapter or a plug with the wrong polarity may damage the device and void the
warranty. Do not exceed 12VDC on the power plug. Power supplies rated for less than 50mA can
cause the device to act unreliably.
Connect your instrument to the INPUT jack of the BBMP2 and the AMP jack to your
amp’s input. Set all knobs to noon except VOL, which should start at minimum.
Power your BBMP2 with a 9V battery or external 9VDC power supply. Press the
Your Bass Big Mu Pi 2 is now ready to play.
Welcome to the Electro-Harmonix Bass Big Mu Pi 2 (BBMP2)!From original Big
Mudesigner, Bob Myer, we bring you his long-lost dual op-amp gain circuit,
now configured for bass players everywhere. Drawing inspiration from the
original Bass Big MuPi, the BBMP2 employs sonic elements specifically added
for bass instruments, such as a wet/dry Blend knob and Bass Boost toggle switch.
The BBMP2 will thicken up your sound and provide over-the-top low-end growl for
a bevy of creamy bass fuzz tones.
Operating Instructions

Beoordeel deze handleiding


Product specificaties

Merk: Electro Harmonix
Categorie: effectpedaal
Model: Bass Big Muff Pi 2

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Bass Big Muff Pi 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden