ElectriQ MD100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ElectriQ MD100 (4 pagina's) in de categorie Ontvochtiger. Deze handleiding was nuttig voor 8 personen en werd door 4.5 gebruikers gemiddeld met 4.1 sterren beoordeeld

Pagina 1/4
USER MANUAL
RECHARGEABLE DESICCANT DEHUMIDIFIER
TWIN PACK
Thank you for choosing electri Q.
Please read this user manual before using this innovative Dehumidier
and keep it safe for future reference.
Visit our page www.electriQ.co.uk for our entire range of Intelligent Electricals
THANK YOU FOR YOUR PURCHASE
The MD100 dehumidier is designed to be used in small conned spaces where a standard
dehumidier cannot be used e.g. drawers, cupboards, storage boxes, cars, caravans, boats
etc.
SAFETY PRECAUTIONS
Keep the dehumidier away from children; this is not a toy.
Do not cover the unit while recharging or in use.
the dehumidier upright with the charging socket on the top during charging. Place
Ensure the dehumidifier is placed on a heat resistant surface during charging.
This product does not contain any cobalt chloride and changes colou using the r
silicon dioxide method.
TECHNOLOGY
Each unit contains desiccant water glass technology crystals. Those crystals are very
absorbent with an absorption rate much higher than traditional soluble absorbing products.
The dehumidier does not need any power to operate.
The desiccant crystals are colorless, odorless and non-toxic and will not re-release moisture
back into the air until the unit is recharged. This new glass desiccant technology is the most
ecient way to absorb moisture where traditional dehumidiers cannot be used.
HOW TO USE
1. arge the unit by plugging it into a wall outlet. Ensure the unit is upright with the Ch
charging socket on the top while it is being charged.
2. When the water glass crystals are colourless or blue, the product is ready for use.
3. Place the unit where you require moisture to be eliminated. The water glass crystals in
the unit will absorb moisture automatically.
4. When the water glass crystals turn pink, the unit has absorbed a signicant amount of
moisture.
HOW TO CHARGE
1. Place the dehumidier on a heat resistant surface with the power socket facing upwards.
2. To discharge the moisture, simply plug the unit into a wall socket for 10-15 hours. The
water glass crystals will return to colourless or blue, indicating that the unit is ready for
use again. Do not charge the unit for more than 18 hours.
3. We advise to charge in a well ventilated area or in a space where a traditional
dehumidier is used, as during charging the moisture collected will be released.
PLEASE NOTE: This dehumidier uses very small heaters during charging to heat the
crystals and release the moisture collected. As such the unit will get warm during charging.
Adequate space must be left around the unit to allow the heat and moisture to be dissipated.
CHARGING DIAGRAM
FREQUENTLY ASKED QUESTIONS
How do I turn the unit on and how do I know if the unit is working?
The dehumidier uses no power while collecting moisture and so does not require a power
switch. The dehumidifier uses a natural process to absorb moisture from the air, and as
long as the unit has been charged, moisture will be collected.
Is it normal for the unit to get warm during charging?
Yes, this is totally normal. The dehumidier uses 2 very small 9 watt heaters to heat the
crystals which then release the moisture.
How often should the unit be charged?
This is very dependent on the area where the dehumidier is placed, as the moisture level in
the air and the airow around the unit will greatly aect the amount of time for the crystals to
become saturated.
Is it normal to see water droplets in the viewing window?
Yes, water droplets can often be seen, both during the drying and charging operations.
This is normal and totally safe.
AC Power Lead
Crystal Viewing Window
Blue: Ready for use
Pink: Requires charging
AC Power Socket
Detachable hook
hanging hole
Can be used with the
supplied hook for hanging
from a clothing rail or other
objects.


Product specificaties

Merk: ElectriQ
Categorie: Ontvochtiger
Model: MD100

Heb je hulp nodig?

Als je hulp nodig hebt met ElectriQ MD100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden