Elecom W-QA07 Handleiding

Bekijk gratis de handleiding van Elecom W-QA07 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Elecom W-QA07 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Input5V / 2A MAX

Output5W

Operating temperature range0°C to 40°C

Storage temperature range −20°C to 60°C (without condensation)

DimensionsApproximately 101 mm (diameter) x 16 mm (thickness)

입력5V/2A MAX

출력5W

사용 온도 범위0℃~40℃

보관 온도 범위-20℃~60℃(결로가 없을 것)

제품 외관지름 약 101mm×두께 16mm

R-R-ELJ-W-QA07

Wireless Charger

Manual

ENGLISH

How to use

* If an error occurs, lift your smartphone to clear the error on the

LEDs, then adjust the position again.

Basic specifications

Place your smartphone so that the coil positions

of your smartphone and the product match with

each other.

Connect this product to a USB charger of 5V / 2A or

more that you have on hand using the supplied cable.

무선 충전기

취급설명서

ENGLISH

사용 방법

※오류가 발생하면 스마트폰을 들어 LED의 오류를 해제한 다음,

위치를 다시 조정합니다.

기본 사양

제품과 스마트폰의 코일 위치를 맞춰 올려놓으면 충전이

시작됩니다.

제공된 케이블로 5V/2A 이상인 USB 충전기(별매품)와

제품을 연결합니다.

Model/Equipment Type: W-QA07모델명: W-QA07

You can charge your smartphone by placing it on the

charger connected to the power supply.

Place and charge

Provided with two LEDs to allow checking of operation with

your smartphone placed either vertically or sideways.

It prevents your smartphone from being scratched or

slipping off due to vibration.

* The product may not work with some types of devices. Please carefully read the instruction manual of

your smartphone and power supply device to be used with the product.

The product conforms to the Qi wireless charging standard that utilizes electromagnetic

induction technology, and supports devices with the same mark.

A USB power adapter (such as an AC charger) is not supplied with the product. (A USB power adapter with output of

5V / 2A or more is required.)

Your smartphone can be charged with the case on if the case is 3 mm thick or less.

* If the case is thicker than 3 mm, or if the case or card is made of metal or magnetized, remove the case or card before

charging.

* Even if the case is not thicker than 3 mm, charging may not be possible depending on the case's specifications or

other conditions.

Connection diagram

Light is off

On standby

Charging

Charging complete

Charging error

Lit blue

Lit red

* The LEDs may not change color when charging is complete depending on the model.

BlueFlashing red

Anti-slip rubber

LEDs for checking operation

Charging possible with the case on

전원을�연결한�본체�위에�올려놓기만�하면�충전이�됩니다.

올려놓으면�즉시�충전

스마트폰을�가로나�세로�어느�방향으로�올려놓아도�작동을�확인할�수

있도록�두�개의 LED를�제공합니다.

스마트폰을�보호하고�진동에�의한�미끄러짐을�방지합니다.

※사용�기기에�따라�제대로�작동하지�않을�수�있습니다. 제품�설명서�및�제품과�함께�사용할�스마트폰과�전원

공급장치의�설명서를�잘�읽어주십시오.

본�제품은�전자�유도�기술을�활용한 Qi 무선�충전�기준을�준수하며�해당�마크를�부착한�장치를

지원합니다.

USB 전원�어댑터(AC 충전기�등)는�제품과�함께�제공되지�않습니다. (출력 5V/2A 이상인 USB 충전기가�별도로�필요합니다.)

케이스�두께가 3mm 이하인�경우�케이스를�장착한�채로�스마트폰을�충전할�수�있습니다.

※케이스�두께가 3mm를�초과하거나, 케이스나�카드�재질이�금속인�경우�또는�자성이�있는�경우에는�충전하기�전에

분리해두십시오.

※케이스�두께가 3mm 미만이라도�케이스�사양이나�조건으로�인해�충전이�불가능할�수�있습니다.

케이블 연결

※스마트폰�모델에�따라�충전이�완료된�후 LED가�변하지�않을�수도�있습니다.

미끄럼�방지�고무�패드

작동�확인용 LED

케이스를�장착한�채로�충전�가능

꺼짐

대기�중

충전�중

충전�완료

충전�오류

파란색

빨간색

파란색�빨간색�깜빡임

This product

Supplied cable

(Approximately 50 cm)

USB-AmicroB

microB

Coil position

Coil position of the product

Coil position of your smartphone

○

×

A USB charger with

output of 5V / 2A or more

is required (not included

in the package).

제품

제공된�케이블

(약 50cm)

USB-AmicroB

microB

코일�위치

제품의�코일�위치

스마트폰의�코일�위치

○

×

출력 5V/2A 이상인 USB

충전기를�별도로

준비하십시오.

Product specificaties